Programming Guide

Settings:
1.Brake: ON/OFF
* ON- Sets the propeller to the brake position when the throttle stick is at the minimum
position (Recommended for folding props).
* OFF- Sets the propeller to freewheel when the throttle stick is at the minimum position.
2.Battery type: LiPo or NiCad/NiMh
* NiCad/NiMH – Sets Low Voltage protection threshold for NiCad/NiMH cells.
* LiPo Sets Low voltage protection threshold for LiPo cells and automatically detects
the number of cells within the pack.
Note: Selecting the NiCad/NiMH option for the battery type, triggers the ESC to
automatically set the cutoff threshold to the factory default of 60%. The cutoff threshold
can then be subsequently altered through the Low Voltage protection function, if required.
The ESC will read the initial voltage of the NiCad/NiMh pack once it is plugged in and the
voltage read will then be used as a reference for the cutoff voltage threshold.
3.Low Voltage Protection Threshold ( Cutoff Threshold ):
Low / Medium / High
1)For Li-xx packs- number of cells are automatically calculated and requires no user input
apart from defining the battery type. This ESC provides 3 setting options for the low
voltage protection threshold ; Low (2.8V)/ Medium (3.0V)/ High (3.2V). For example :
the voltage cutoff options for an 11.1V/ 3 cell Li-Po pack would be 8.4V (Low)/ 9.0V(Med)/
9.6V(High)
2) For Ni-xx packs-low / medium / high cutoff voltages are 50%/60%/65% of the initial
voltage of the battery pack.. For example: A fully charged 6 cell NiMh pack’s voltage is
1.44V x 6=8.64V,when “LOW” cutoff voltage is set, the cutoff voltage is: 8.64V x
50%=4.3V and when “Medium” of “High” is set, the cutoff voltage is now 8.64V X
65%=5.61V.
4. Restore factory setup defaults:
Restore- Sets the ESC back to factory default settings;
Brake OFF
Battery type Detect LiPo with Automatic Cell
Low voltage Cutoff threshold Medium (3.0V/60%)
Timing Setup Automatic
Soft Acceleration Start Up Soft Acceleration
Governor Mode RPM OFF
Frequency 8kHz
Low Voltage Cutoff Type Reduce power