User Manual

EN
5
Integrated Telemetry
This aircraft includes telemetry between the ESC and
receiver, which can provide information including; RPM,
voltage, motor current, throttle setting (%), FET (speed
controller) temperature, and BEC (servo power supply)
temperature.
To View Telemetry
1. Begin with the transmitter bound to the receiver.
2. Power on the transmitter.
3. Power on the aircraft.
4. A signal bar appears in the top left corner of the screen
when the telemetry information is being received.
5. Scroll past the servo monitor to view the technology
screens.
For more information about compatible transmitters, firm-
ware updates, and how to use the telemetry technology on
your transmitter, visit www.SpektrumRC.com.
SAFE
®
Select Technology
When SAFE Select is activated, bank and pitch limitations
keep you from over-controlling the aircraft. Additionally,
by releasing the controls in the event you lose orientation,
SAFE Select will keep the aircraft level.
To activate SAFE
®
Select, flip the Gear channel switch to
position 0. Return the Gear switch to position 1 to turn
OFF SAFE Select and fly with just the assistance of AS3X
®
technology.
If you become disoriented or the aircraft is in a confusing
attitude, flip the Gear switch to position 0 and release the
sticks. With the aileron, elevator and rudder sticks in the
neutral position, SAFE Select will automatically keep the
airplane in a straight and level attitude.
Disabling and Enabling SAFE Select
By default, the SAFE Select function of your UMX aircraft is
enabled and assigned to the Gear channel switch (channel
5). If you do not wish to have access to SAFE Select while
flying, you can choose to disable SAFE Select functionality.
AS3X will still be active when SAFE Select is disabled.
IMPORTANT: Before attempting to disable or enable SAFE
Select, ensure the aileron, elevator, rudder, throttle and
gear channels are all on high rate with the travel set to
100%. Turn throttle hold OFF if it is programmed in the
transmitter.
CAUTION: Keep all body parts clear of the rotor,
intake and exhaust tube and keep the aircraft
securely restrained in case of accidental throttle
activation.
1. Power on the transmitter.
2. Power on the aircraft.
3. Hold both transmitter sticks to the inside bottom
corners and toggle the Gear switch 5 times
(1 toggle = full up and down). The control surfaces of
the aircraft will move, indicating SAFE Select has been
enabled or disabled.
Repeat the process again to re-enable or disable SAFE
Select.
DX4e, DX5e, DXe, and DXS Transmitters
The Gear switch is the FMODE switch on the these
transmitters, and the switch needs to be toggled between
position 0 and 2 when disabling/enabling SAFE Select.
100%
x 5
100%
Mode 1 and 2 Transmitters