UMX Turbo Timber BNF Basic - Manual

10
EN
Power Components Service
Disassembly
CAUTION: DO NOT handle the propeller
while the flight battery is connected to
the ESC. Personal injury could result.
Propeller
1. Carefully remove the screw (A) and propeller (B)
from the motor shaft.
D
C
F
E
Assembly
Assemble in reverse order.
• Connect the motor wire connector to the ESC/receiver.
• The propeller size numbers (5.75x2.5) must face out
from the motor for correct propeller operation.
• Ensure the propeller adapter and motor mount are fully
connected to the motor.
Motor
1. Remove the battery hatch by gripping the front of the
hatch, then pulling it up and away from the fuselage.
2. Disconnect the motor wire connector from
the ESC/receiver connector.
3. Remove the screw (C) and motor (D) from the motor
mount.
4. Remove 3 screws (E) and the prop adapter (F)from
the motor. The motor magnet may attract screws to
the motor.
A
B