User Manual

28 E-flite Enticement F3P Profile Assembly Manual
 10. Attach the propeller to the motor following the
instructions provided with the motor.
Final Assembly
Required Parts
Assembled airframe Side force generator (4)
Drag brake (2) Wheel pant (2)
3
1
/
8
-inch (80mm) carbon rod (4)
2-inch (50mm) carbon rod (2)
Required Tools and Adhesives
Foam-safe CA Foam-safe CA activator
Square Ruler
 1. The side force generators are positioned on the wing,
aligned with the two holes near the wing tip. Use foam-
safe CA and a square to glue the side force generators to
the top and bottom of the wing.