Park 370 Brushless Outrunner Motor Manual

ManualsBrandsE-flite ManualsHobbyPark 370 Brushless Outrunner Motor, 1360Kv

Park 370 & Park 400 Outrunner Brushless Motors Instructions

Park 370 Outrunner Features:

• Upgrade your Speed 280 and Speed 370 applications

• Excellent motor for small 3D airplanes 7 oz – 14 oz (200 g – 400 g)

• Motor mount included

• Prop adapter and gold-plated connectors included

• Slotted 12-pole outrunner design

• EFLM1210HS features a 4mm hollow shaft and optimized 1200 Kv – it is ideal for variable pitch operation

Park 370 Outrunner Specifications

Diameter: 28mm (1.10 in)

Case Length: 25mm (1.00 in)

Weight: 45g (1.6 oz.)

Shaft Diameter: 3.17mm (1/8 in)

Shaft Diameter for Hollow Shaft (EFLM1210HS only): 4mm (.16 in)

EFLM1200 EFLM1205 EFLM1210HS (Hollow Shaft Motor)

Kv: 1080 (rpms per volt) Kv: 1360 (rpms per volt) Kv: 1200 (rpms per volt)

Io: .70A @ 10V (no load current) Io: 1.00A @10V (no load current) Io: .60A @ 10V (no load current

Ri: .19 ohms (resistance) Ri: .10 ohms (resistance) Ri: .18 ohms (resistance)

Continuous Current: 9A* Continuous Current: 12A* Continuous Current: 10A*

Max Burst Current: 11A* Max Burst Current: 15A* Max Burst Current: 12A*

Watts: up to 110 Watts: up to 150 Watts: up to 120

Cells: 6-10 Ni-Cd/Ni-Mh, 2-3 Li-Po Cells: 6-10 Ni-Cd/Ni-Mh, 2-3S Li-Po Cells: 6-10 Ni-Cd/Ni-Mh, 2-3S Li-Po

Prop Range: 9x4.7-10x4.7 Prop Range: 8x6-10x4.7 / 8x3.8 (3 cell) Prop Range:

8x3.8-10x4.7

Brushless ESC: 10- to 25-Amp Brushless ESC: 10- to 25-Amp Brushless ESC: 10- to 25-Amp

Park 400 Outrunner Features:

• Replacement for Speed 370 and some Speed 400 applications

• Excellent motor for small 3D and scale park flyers 10 oz – 20 oz (280 g – 560 g)

• Motor mount included

• Prop adapter (EFLM1923) and gold-plated connectors (EFLA241) included

• Slotted 12-pole outrunner design

Park 400 Outrunner Specifications

Diameter: 28mm (1.10 in)

Length: 29mm (1.15 in)

Weight: 56g (2.0 oz)

Shaft Diameter: 3.17mm (1/8 in)

EFLM1300 EFLM1305

Kv: 740 (rpms per volt) Kv: 920 (rpms per volt)

Io: .55 @ 10V (no load current) Io: .70A @10V (no load current)

Ri: .26 ohms (resistance) Ri: .10 ohms (resistance)

Continuous Current: 7A* Continuous Current: 10A*

Max Burst Current: 10A* Max Burst Current: 13A*

Watts: up to 100 Watts: up to 140

Cells: 6-10 Ni-Cd/Ni-Mh, 2-3 Li-Po Cells: 6-10 Ni-Cd/Ni-Mh, 2-3 Li-Po

Prop Range: 10x7-12x3.8 Prop Range: 9x7-11x4.7

Brushless ESC: 10- to 25-Amp Brushless ESC: 10- to 25-Amp

Summary of content (4 pages)

PAGE 1
Park 370 & Park 400 Outrunner Brushless Motors Instructions Park 370 Outrunner Features: • Upgrade your Speed 280 and Speed 370 applications • Excellent motor for small 3D airplanes 7 oz – 14 oz (200 g – 400 g) • Motor mount included • Prop adapter and gold-plated connectors included • Slotted 12-pole outrunner design • EFLM1210HS features a 4mm hollow shaft and optimized 1200 Kv – it is ideal for variable pitch operation Park 370 Outrunner Specifications Diameter: 28mm (1.10 in) Case Length: 25mm (1.
PAGE 2
* Maximum Operating Temperature: 220 degrees Fahrenheit * Adequate cooling is required for all motor operation at maximum current levels. * Maximum Burst Current duration is 15 seconds. Adequate time between maximum burst intervals is required for proper cooling and to avoid overheating the motor. * Maximum Burst Current rating is for 3D and limited motor run flights. Lack of proper throttle management may result in damage to the motor since excessive use of burst current may overheat the motor.
PAGE 3
Operating Instructions: 1. This brushless motor requires the use of a sensorless brushless speed control. Failure to use the correct speed control may result in damage to the motor and/or speed control. 2. When mounting the motor, be sure the correct length of screws are used so damage to the inside of the motor will not occur. We suggest you use the mounting hardware included with your motor. The use of long screws will damage the motor. 3.
PAGE 4
If you as the Purchaser or user are not prepared to accept the liability associated with the use of this Product, you are advised to return this Product immediately in new and unused condition to the place of purchase. Law: These Terms are governed by Illinois law (without regard to conflict of law principals). Safety Precautions: This is a sophisticated hobby Product and not a toy. It must be operated with caution and common sense and requires some basic mechanical ability.