EFLU5850 E-flite Ultra-Micro UMX Aero Commander BNF Manual

3
EN
To register your product online, go to www.e- iterc.com
20.15 in (512mm)
28.15 in (715mm)
5.1-5.6oz
(145-160g)
Specifi cations
Wing Area: 119.0 sq In
(7.7 sq Dm)
Prefl ight Checklist
Installed
Motor: (2) BL180 Brushless Outrunner
3,000Kv (EFLUM180BLB)
Receiver : DSM2
®
6 Ch. UM AS3X
®
RX
BL-ESC (EFLAS6410NBLT)
(2) 2.3-Gram Performance Linear Long
Throw Offset Servo (SPMSA2030LO)
Required to Complete
Battery: 450-800mAh 2S 7.4V 30C
Li-Po, (EFLB4502SJ30, EFLB8002SJ30))
Battery Charger:
Celectra™ 2S 7.4V DC Li-Po Charger
(EFLUC1007)
Recommended Transmitter:
Full range Spektrum™ DSM2
®
/DSMX
®
with dual-rates (DXe and up)

1. Charge  ight battery.
2. Install  ight battery in aircraft (once it
has been fully charged).
3. Bind aircraft to transmitter.
4. Make sure linkages move freely.
5. Perform Control Direction Test with
transmitter.
6. Perform AS3X control Direction Test with
aircraft.

7. Set dual rates.
8. Adjust center of gravity.
9. Perform a radio system Range Check.
10. Find a safe and open area.
11. Plan  ight for  ying  eld conditions.
12. Set  ght timer for 5 minutes for  rst
 ight.