EFLU3650 UMX F4F Wildcat Manual

Landing Gear Removal

1. Carefully remove the lower strut brace (A) by

unsnapping each side from the struts and then

pulling the bracket away from the fuselage.

2. Carefully pull the back side of the upper strut

brace (B) out of the fuselage and then unsnap it

from the strut. Remove the left and right side.

3. Carefully squeeze the landing gear strut

assembly (C) together and pull it out of the

retaining slot.

When needed, disassemble in reverse order.

Retracted Landing Gear Installation

1. Align the faux retracted landing cover (A) with

the landing gear retaining slot.

2. Press the center of the cover into the slot and

work your way out to the sides.

3. Press the wheel hub area of the cover to fully

secure it into place.

When needed, disassemble in reverse order.