EFLU5950 UMX Cirrus SR22T Manual

10
EN
Power Components Service
Disassembly
CAUTION: DO NOT handle the propeller
while the fl ight battery is connected to the ESC.
Personal injury could result.
Propeller
1. Carefully remove the spinner (A) screw (B) and
propeller (C) from the motor shaft.
Assembly
Assemble in reverse order.
• Connect the motor wire connector to the ESC/
receiver.
• The propeller size numbers (120mm x 70mm)
must face out from the motor for correct
propeller operation.
• Ensure the propeller adapter and motor mount
are fully connected to the motor.
Motor
1. Remove the battery hatch by cutting through
the tape securing the front then pulling it up
and away from the fuselage.
2. Disconnect the motor wire connector from
the ESC/receiver connector.
3. Remove the screw (D) and motor (E) from
the motor mount.
4. Remove 3 screws (F) and the prop adapter (G)
from the motor. The motor magnet may attract
screws to the motor.
E
D
G
F
A
C
B