EFLU5950 UMX Cirrus SR22T Manual

3
EN
To register your product online, go to https://www.horizonhobby.com/content/e-fl ite-rc
20.2 in (512mm)
28.8 in (732mm)
4.2oz
(118g)
Specifi cations
Wing Area: 87.8 sq In
(5.7 sq Dm)
Prefl ight Checklist
Installed
Motor: BL180 Brushless Outrunner
3,600Kv (EFLUM180BLD)
Receiver : DSM2
®
6 Ch. UM AS3X
®
RX
BL-ESC (EFLA6420BL)
(2) 2.3-Gram Performance Linear Long
Throw Offset Servo (SPMSA2030LO)
Required to Complete
Battery: 280mAh 2S 7.4V 30C Li-Po,
(EFLB2802S30)
Battery Charger:
Celectra™ 2S 7.4V DC Li-Po Charger
(EFLUC1007)
Recommended Transmitter:
Full range Spektrum™ DSM2
®
/DSMX
®
with dual-rates (DXe and up)

1. Charge fl ight battery.
2. Install fl ight battery in aircraft (once it
has been fully charged).
3. Bind aircraft to transmitter.
4. Make sure linkages move freely.
5. Perform Control Direction Test with
transmitter.
6. Perform AS3X control Direction Test with
aircraft.

7. Set dual rates.
8. Adjust center of gravity.
9. Perform a radio system Range Check.
10. Find a safe and open area.
11. Plan fl ight for fl ying fi eld conditions.
12. Set fi ght timer for 5 minutes for fi rst
fl ight.