Specification Sheet

MIDSUN SPECIALTY PRODUCTS
378 Four Rod Rd. Berlin, CT 06037 USA
tel [phone] | web midsunsp.com
860-378-0111 | fax [phone]
E/Fusing 112 Product Data Sheet
Page 1 of 1
Last Revision: 03/27/18
112
Extreme Temperature
Self-fusing Silicone Electrical Tape
PRODUCT INFORMATION
Product Description:
E/FUSING TAPE 112 is a self-fusing silicone splicing tape
for use in extreme temperatures and harsh conditions
where vinyl adhesive electrical tapes cannot withstand.
Features:
• No Adhesive - Chemically bonds to itself on contact
and will not stick to substrate
•
• Little to no surface preparation required
• Extreme Temperature Range
• Chemical and UV resistant
• Easy to apply
APPLICATION EXAMPLES
• Cable Terminations
• Motor lead connections
• High voltage cable overwrap
• Splice overwrap on spacer cable
SPECIFICATIONS
Property Test Method Value
Continuous Temperature
Range
-65°F to +450°F
-54°C to +232°C
Intermittent Temperature
Range (24 hrs max)
-85°F to 500°F
-65°C to 260°C
Cold Brittle Point Max ASTM
D-2137
-85°F
-65°C
Water Absorption Fed STD 601
Method 6251
3% Max
by weight
Tensile Strength ASTM D-412 700 PSI
Minimum
Elongation ASTM D-412 300%
Minimum
Dielectric Strength ASTM D-412 8,500 V
per layer
Durometer Hardness 50 Shore A
Thickness Tolerance +/- .002 in
+/- 0.05 mm
Width Tolerance ni 521.0 -/+
+/- 3.175 mm
CONSTRUCTION
Material Self-fusing Silicone Rubber
Liner Polystyrene
Thickness 12 mil (0,305 mm)
Width 1 inch (25,4 mm)
Length 30 feet (9,14 m)
Rectangular
Color Gray
Guideline Red
STORAGE / HANDLING / SHELF LIFE
Storage Store in a cool and dry area, away from
direct sunlight.
Handling Keep tape roll clean and free of dust, dirt
or debris.
Shelf Life 5 years
TECHNICAL DATA SHEET
APPLICABLE STANDARDS
• Meets UL 510 requirements
•
•
• Class H Insulation
DISCLAIMER: Midsun Specialty Products, Inc. (MSP) warrants that the product(s) represented within conform(s) to its/their chemical and physical description and is appropriate
for the use as stated on the respective technical data sheet when used in compliance with MSP written instructions. Since many installation factors are beyond the control of
MSP, the user is obligated to determine the suitability of the products for the intended use and assume all risks and liabilities in connection herewith. MSP liability is stated in
the standard terms and conditions of sale. MSP makes no other warranty either expressed or implied. All information contained in the respective technical data sheet(s) should
be used as a guide and is subject to change without notice. This document supersedes all previous revisions.