User Manual

A
B
C
D
E
K
T
S
Q
G
H
M
J
R
L
I
F
N
A
M
B
C
E
G
loose
lock
loose
lock
F
loose
lock
lock
loose
1. Installing Pan Handle
Place the pan handle A in the desired position on the rosette M and tighten the locking
thumb screw C, making sure the locking washer T is in place between the handle and
rosette. Loosen the length adjustment knob B on the pan handle to adjust the length of
the handle. Length adjustment is only available on GB2 and GB3 pan handles.
2. Installing the Fluid Head on a Tripod
Adjust the tripod to the desired height, and place the ball of the head into the bowl of
the tripod. Level the head using the bubble level R, and secure the bowl locking
knob F onto the bottom of the head on the underside of the tripod bowl.
3. Removing the Quick Release Plate
Loosen locking knob E and hold the release button G while sliding the plate toward
the rear of the head.
G
SET UP & USE(GH06-GH25)PARTS(GH06~GH25)
7 8
A Pan Handle
Pan Handle Length Adjustment Knob
Pan Handle Locking Thumb Screw
Quick Release Plate Camera Locking Screw
Quick Release Plate Locking Knob
Bowl Locking Knob
Quick Release Plate Release Button
Tilt Locking Knob
Counterbalance Adjustment Dial
Tilt Drag Adjustment Dial
Pan Locking Knob
Pan Drag Adjustment Dial
Pan Handle Mounting Rosette
Bubble Level LED Power Button
Quick Release Plate
Bubble Level
Rubber Washer
Pan Handle Locking Washer
B
C
D
E
F
G
H
I
J
K
L
M
N
Q
R
S
T