User Manual

G
D
E
F
loose
lock
C
B
loose
lock
loose
lock
J
lock
loose
H
ReduceIncrease
1.Install Pan Handle
Place the pan handle E in the desired position on the pan handle mounting
rosette F, then secure it by tightening pan handle locking thumb screw D.
2. Removing the Quick Release Plate
Loosen the quick release plate locking knob B, then press the quick release
plate release button C while sliding the plate A towards the back of the head.
5.Tilt Drag Adjustment
Increase tilt drag by turning the tilt drag adjustment knob H clockwise
(as if tightening a screw). Reduce the tilt drag by turning the knob H
counter-clockwise (as if loosening a screw).
C
3.Adjusting Tilt Position
Loosen the tilt locking knob G to change tilt position. Tighten the knob to
lock the tilt position.
4.Adjusting Pan Position
Loosen the pan locking knob J to change the pan position. Tighten the
knob to lock the pan position.
SET UP & USE (GH03)
3 4