User Manual

MOUTING THE CAMCORDER VIA ADAPTER

4.Mounting a Large Camera with the PS-C VCT-14 Adapter

4.1 Attach the quick release plate to the bottom of the VCT-14 mounting

adapter (part no. PS-C) using the ¼”-20 or 3/8”-16 screws included with

the head. Take care not to over-tighten the screws when mounting the

plate.

4.2 Slide the quick release plate onto the tripod head. The plate release

button will click when it is in place.

4.3 Make sure the head’s pan and tilt axis are locked, and attach the

camera’s VCT-14 wedge to the PS-C adapter. It will click when it is

locked in place. Loosen the quick release plate lock and adjust the

position of the camera to find the desired center of balance.

5.2 Make sure the head’s pan and tilt axis are locked, then slide the

quick release plate onto the head, moving from the rear to the front. The

plate release button C will click when the plate is in place. Slide the plate

along the track until you find the center of balance, then lock the plate in

place with the locking knob E.

MOUNTING THE CAMERA

5.Mounting the Camera to the Quick Release Plate

5.1 Attach the quick release plate to the bottom of the camera using the

included ¼”-20 or 3/8”-16 screws. Take care not to over-tighten the

screw when mounting the camera.