User manual
3F02-INS-LAB-RevC10,March2010•TravelerL4UserManual 15
Installrearwheel—optionalquick-releaseaxle
Depress the quick-release push button in the rear wheel hub and insert
into axle sleeve.
WARNING: When reassembling the wheelchair after remov-
ing the rear wheels, ensure the rear axles are locked in place
(check that locking buttons extend completely, and rear wheels
spin freely but can't be pulled off), to prevent wheels from fall-
ing off.
WARNING: Perform your rear wheel and caster adjustments in
accordance with the instructions in this manual — failure to do
so could create a hazardous situation, or a situation in which
the caster housings are not perpendicular to the ground, mak-
ing steering difficult.
WARNING: Wheel locks may no longer fit after adjusting rear
wheel height. See wheel lock adjustment section to adapt
wheel locks to fit after adjusting rear wheel height.
WARNING: Anti-tipper height may not be appropriate after ad-
justing rear wheel height. See anti-tipper adjustment section to
adapt anti-tipper rollers to fit after adjusting rear wheel height.