Installation & Assembly

Step 2 - Install the privacy screen

INSTRUCTIONS

Connect metal panels with metal

screws

Assemble all three screens with screw by aligning the

privacy

screen into appropriatescrewplaces so that

it becomes flush with the each other

and have

another person to keep the privacy screen intact.

Connect the metal panels with Pre-

setup pole using metal screws

Secure the privacy screen to the bracket using the

metal screws. Tighten the hardware while holding

the parts into place.

Backup the metal screws previously connected

panels

Use drill bit to enlarge the holes, Reconnect the

panels using screws and bolts. Tighten the bolt and

nut using the L shape wrench, Setup another pole

and connect the other end of the panel to pole.

Repeat the entire procedure for each additional

privacy screen, ifdesired

For each additional privacy screen, simply repeat the entire

procedure until the total amount of privacy screens installed

sufficient.