Installation Instructions

KEY NO. PART NO. DESCRIPTION
1 15.101 Single Compartment Laundry Tray
2 19.203 Molded Side Filler – Left Hand
3 19.202 Molded Side Filler – Right Hand
4 18.201 Wall Plate
5*Lag Screw, 5/16” x 2” (4 Required)
6*Anchor, Plastic, 5/16” (4 Required)
7*Drive Rivet – 1/4” Dia. x 3/4” Lg. (4 Required)
8*Stopper – 1-1/2” Diameter
9*5/16” Flat Washer (2 Required)
10 * 1-1/2” Tailpiece Washer (Not Shown)
11 * 1-1/2” Thrd. Slip Nut (Not Shown)
Cleaning Note
:
Most stains that you may acquire in your Model 15W Laundry Tray may be removed with common household cleanser
or liquid cleaner. Stubborn stains may be removed with a bleach solution – follow bleach manufacturer’s recommended
procedures pertaining to safety, handling and use of their product.
*NOTE: FOR REPLACEMENT HARDWARE, ORDER COMPLETE PARTS PACKAGE PART NO. 19.601
PACKAGES WILL NOT BE SPLIT FOR INDIVIDUAL PARTS.
NOTE:
Any type of transfer or sump
pump must be supported by the
floor or wall plus appropriate
bracing for the waste lines. DO
NOT RELY SOLELY ON
THE 1/2” MOLDED DRAIN
CONNECTION.
PAR
TS ILLUSTRATION
PARTS LIST
E.L. MUSTEE & SONS, INC.
5431 West 164th Street • Brook Park, Ohio
SI-140 (05•06)
MODEL 15W (15WK)
IAPMO
®
LISTED
FILE NO. 0635