Technical Specifications

8
1
/
2
"
15"
30"
12"
60"
1
/
7
/
12"
Entry Ramp
Optional
30"
Shower Floor
1"
"
"
48
4
"
Notice: Our continuous commitment to product improvement may result in changes to product specifications without notice.
E.L. Mustee & Sons, Inc. • 5431 West 164th Street • Brook Park, OH 44142 • Phone: [phone] • Fax: [phone]
Web: www.mustee.com • Proudly made in the USA
CareGiver
®
360 Barrier-Free Shower Floor
360.100 Entry Ramp
Design features:
 Produced from high-grade, compression molded fi berglass for
optimum strength.
 Fits 60" wide by 30" deep alcove.
 Drain hole is offset 8-1/2" x 15" for connection to 2" DWV piping.
 Smooth, semi-gloss fi nish. Slip resistant surface.
 Mold and mildew-resistant…easy to clean.
 360.100 Entry Ramp (order separately) creates curbless entry and exit
for wheelchairs and walkers.
 Optional drain kit is available for connecting to existing 1-1/2" bathtub
DWV line.
 Fits DURAWALL
®
Shower Walls (see Accessories) as well as ceramic
tile or preformed wall kit.
General: Furnish and install as shown on plans, barrier-free DURABASE
®
Shower Floor Model 360
as manufactured by E.L. Mustee & Sons, Inc. Shower fl oor to be one-piece, compression molded
fi berglass. Surface to be slip resistant design. Size: 30" x 60". Shoulder will be not less than 3-1/16"
high or less than 1-1/4" wide. Tiling fl ange will extend not less than 1" higher than shoulder. Shower
fl oors shall not have curb used in conjunction with 12" x 60" entry ramp per ADA requirements. Drain
available on right or left side, offset 8-1/2" x 15". Shall meet ANSI Z 124-2017. Color: White. Install in
compliance with local codes.
General: Furnish and install as shown on plans Shower Floor Entry Ramp Model 360.100, as
manufactured by E.L. Mustee & Sons, Inc. Ramp to be one piece, molded fi berglass made with
matched metal molds. Slip resistant surface. Trimmable to accommodate other structure. Size
12" x 60". Color: White.
Code Accepted:
 International Association of Plumbing and Mechanical Offi cials (IAPMO)
®
Listed US & CSA Standard
 American National Standards Institute (ANSI) – Specifi cation ANSI Z 124-2017
 American Society of Testing and Materials (ASTM) – E-84
 International Code Council – ICC/ANSI A117.1
 Canadian Standards Association – CSA B45.5-17
Specifi cations
Model Color Drain Location Fits Alcove UPC
Barrier-Free Shower Floor 30" x 60"
360R White Right hand 30" x 60" 6 71031 00271 6
360L White Left hand 30" x 60" 6 71031 00273 0
Entry Ramp (Order separately) 12" deep x 60" wide
360.100 White — — 6 71031 00275 4
Top View
Entry Ramp
Reverse for RH installation with every ramp.
Shower Floor