Technical Specifications

98 DURAPAN
™
Washer / Water Heater Pan
Outlet Drain May Be Installed to Any
Side or Backwall — for placement
away from DWV Pipe

Sturdy One-piece Molded Fiberglass, white

Removable Aluminum Front Threshold — for
Ease of Washer Placement

Side Outlet Solvent Weld 1" DWV 90° Elbow
Fitting (Furnished), Mounts to side of
DURAPAN
™

Remains Stationary — can be secured to floor,
hardware included

Easy to Install
Code Accepted
Fiberglass Durapans meet or exceeds performance requirements:

American Society of Testing and Material (ASTM)— D 635, E 84 and E 162
Installin
g
Side Outlet Fittin
g
...
Drill hole through any side or
back wall. Install solvent weld
elbow fitting and connect 1" PVC
pipe (not provided) leading to
DWV drain.
SPECIFICATIONS
Model No. Drain Location Overall Inside UPC
General: Furnish and install as shown on plans, DURAPAN
™ Wash Machine Pan model 98, as
manufactured by E.L. Mustee & Sons, Inc. One-piece compression molded fiberglass, using
matched metal molds under extreme heat and pressure. Shoulder will be no less than 2-1/2" high.
Removable aluminum threshold with water tight seal secured by stainless steel screws. May be
secured to sub-floor, mounting hardware provided. Shall include (1) 1" NPSM-90° elbow fitting.
Shall meet ASTM D 635, E 162-75 and E 84. Color: White. Weight 20 lbs., cubic ft. 1.8. Install in
compliance with local codes.
98 Side drill hole 30"Lx32"Wx2-1/2"H 28"Lx29"W 6 71031 00299 0
E. L. Mustee & Sons, Inc.
5431 West 164th Street
Brookpark, OH 44142
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.mustee.com