User manual

User Manual of Network Camera

video for the motion occurred in the surveillance scene.

Steps:

1. Set the Motion Detection Area.

Steps:

(1) Enter the motion detection settings interface

Configuration > Advanced Configuration> Events > Motion Detection

(2) Check the checkbox of Enable Motion Detection.

Figure 5-25 Enable Motion Detection

(3) Click . Click and drag the mouse on the live video image to draw a

motion detection area.

Note: You can draw up to 8 motion detection areas on the same image.

(4) Click to finish drawing.

Note: You can click to clear all of the areas.

(5) Move the slider to set the sensitivity of the

detection.

2. Set the Arming Schedule for Motion Detection.

Steps: