User manual

Network Video Manager System
-23-
router's WAN address. The control mapping port and TCP A/V mapping port will be added the entrance port within the router
can be set up.
2.4.2 Device setup
Click the host in the
from the Device Setup interface, to connect the host to configure its
parameters。Include: device information, configure the device user name and password login, equipment hardware, alarm
configuration, local recording, CMS configuration, network services and restart the equipment.
2.4.2.1 Login Settings
IP Camera device registry settings to use the account and password. Account for the default "admin", the default
password is "admin". Account number and password are case-sensitive.
2.4.2.2 Stream Setting
Each device can be configured for different video stream, each device can be configured with up to three different video
stream.
2.4.2.3 Equipment hardware configuration
: Click the Refresh button to refresh the current page on the remote IP Camera equipment parameters.
: Click Apply button to modify the current page has the parameters stored in the remote IP Camera equipment.
Device hardware configuration, including network parameters, the name of the camera system, date and time, in/out