User manual

Network Video Manager System
-4-
Input the default user name and password, click ‘logging in’ button to enter the real time surveillance interface.
IP Address: client software used by the local IP address.
Note: Enter the user name and password three times wrong, The user name that is locked into the state, Before
unlocking the former will not be allowed to re-use, If you need to unlock the super-user must log on the client in the "System
Settings" "user" option in the "unlock" operation.
2.2 The real time surveillance and Interface introduced
Real-time video connections in two ways: one is a list of the region for the selection of equipment, double-click the left
mouse button in a specified sub-screen video to connect the device; and the other for the selection of equipment, the
equipment list click on the region below the interface of the "Play" button in the a specified sub-screen video to connect the
device.
IP Camera equipment can be displayed in two ways the region in the device list, IP Camera is usually within the LAN
network, it will automatically broadcast to the client, the device automatically appear in the list of the region; If users need to
manually add devices, please refer to "2.3.1 Equipment Maintenance" add a device manually.
Note: The supported IP cameras can only accept up to ten connections for video at the same time.