User manual

-40- -41-

Figure 8-7 Network interface

Step 2 Configure the network parameters, reference the Table 8-1.

Table 8-1 Network parameters

Items Introduction How to configure

Get IP

address

automatic

ally

It will get the IP address from DHCP

server automatically.

Switch DHCP to on by this

button .

Address

Camera IP address, it can configure the

IP address depends on real situation.

Default IP is 192.168.0.120

Subnet

mask

Configure the subnet mask Default address is

255.255.255.0

Gateway Input if needed Default is 192.168.0.1

DNS Configure the DNS server address Default is 192.168.0.1

Step 3 Click to application



Call the Apply successfully; click OK to finish the network parameters

configuration.



If pop up other windows, then please confirm the parameters are all correct and

configure again.

8.1.5 Live video layout

You can configure the live video layout in order to call the live video quickly.

Live video layout can do below operations:



Create new layout



View current layout



Edit current layout

Create New layout

The steps to create new layout below:

Step 1 NVR Setup> Live Video Layout

Enter the live video layout like Figure 8-8.

Figure 8-8 Live video layout

Step 2 Click Net to call the new layout like Figure 8-9.

Figure 8-9 New layout

eLineTechnology.com