User manual

-44- -45-
Figure 8-12 Schedule record configuration
Step 6 Whether to enable the alarm record

If not want to enable the alarm record, then just set the button to OFF.

If want to enable the alarm record, then set the button to ON.
Step 7 Whether to enable the audio
Step 8 Configure the Storage Policy
Storage Policy you can select:

When HDD is full, record cycle.

Retention day time.
Step 9 Configure the HDD disk group.
There will be 2 HDD disk groups. We can set the recording to be recorded into two
different HDD disk groups.
Step 10 Configure the record streams bit rates.
Step 11 Click Apply to save the configurations and exit the record policy interface.
---- End
8.1.7 Storage policy
In storage policy interface, you can do the following operates:

Check the current HDD status.

Check the HDD information details; include HDD capacity, free space.

Unload and Format operates.
Firstly using HDD need to format first otherwise the recording file cannot be written into the
HDD.
Select System configuration>Record>Storage Configuration.
Enter the Storage Configuration, like Figure 8-13 showing.
Figure 8-13 Storage Configurations
To protect the HDD, before you plug out the HDD, you have to unload the HDD firstly.
8.1.8 Account Management
Privilege group setting
User’s basic privilege includes:

Live video

Playback
eLineTechnology.com