User manual

-62- -63-
Select the devices which you want to delete, click delete then can delete the cameras which you added
Step 5 Click Apply to call the “configure successfully interface”, click OK to save the
configuration.
Figure 10-7 Add device
---- End
10.4.5 NVR Record
NVR record can set the Record Policy and Record Storage.
Record Policy
Step 1 Select device manager->NVR management->Record->Record Policy enter the record
policy interface show in Figure 10-8.
Figure 10-8 record policy
Step 2 Select the device and click Configure.
After promote the Record Policy Setting then can set the Schedule record, Alarm
Record, audio record etc.
Step 3 Set the policy which you need.
Step 4 After you set the configuration click Apply to set.
---- End
Record Storage
Step 1 Select device manager->NVR management->Record->Record Storage. Enter the
record storage interface show in Figure 10-9.
eLineTechnology.com