PTZ Dome Camera Operation Manual ELI-EPTZ-27DN Read this Manual carefully before installation and keep it for future reference.
Operation Manual ELI-EPTZ-27DN eLineTechnology.com Notice: Precautions: 1.Non-techinician is forbidden to operate this dome device before reading this manual thoroughly. 2.Cut the power supply off before operating the dome device to avoid damage caused by improper operation. 3.Interior of the Dome device are precision optical and electrical device. Heavy pressure, shock and other incorrect operations should be prevented. Otherwise, may cause damage on product. 4.
Operation Manual ELI-EPTZ-27DN eLineTechnology.com 1.2 Feature Functions Instruction ..................................................................... 3 Chapter 2 Menu setting............................................................................................... 4 2.1 Operation instructions ................................................................................ 4 2.2 Main menu ................................................................................................. 5 2.
Operation Manual ELI-EPTZ-27DN eLineTechnology.com Pan 360 degree continuous scanning. Tilt 90 degree action plus 2 degree angle adjustment. Plus the 2 degree adjustment, the view angle can be 90 or 92 degree. Pan manual operation speed can be 0.1 to 300 degree per second. Tilt manual operation speed can be 0.1 to 120 degree per second. 128 preset positions.
Operation Manual ELI-EPTZ-27DN eLineTechnology.com concrete position shooting by the camera) Auto enter function running after self-test of the dome device and auto enter function running when there is no transmission.(Dwell time can be set from 5 to 999 seconds) Freeze video picture function.(frozen picture function) Operation return function.(after executing operation return, the dome device will return to the previous operation) Intelligent manual scan function.
Operation Manual ELI-EPTZ-27DN eLineTechnology.com 2.2 Main menu 95+SHOT+ACK to enter the main menu of the dome as illustrated down. TITLE TITLE 1 LANGUAGE ENGLISH The title may be different with different type 2 DOME INFORMATION of dome. 3 DISPLAY OPTIONS 1. Language Setup Language: English. 4 CONTROL OPTIONS 2.
Operation Manual ELI-EPTZ-27DN eLineTechnology.com 2.4 Display Options Set the display of dome info or function. Operation steps DISPLAY OPTIONS [1].Joystick up/down to move the cursor to 1 CAMERA NAME SETUP 2 COORDINATES ON 3 START_UP SCR MSG ON 4 CROSSHAIRS ON select Display Options [2].Joystick left/right to enter Display Option [3].Joystick up/down to select either one of the sub-menu [4].Joystick left/right to select ON/OFF 2.4.1 Camera Name Setup Set the camera name 1.
Operation Manual ELI-EPTZ-27DN eLineTechnology.com 2.5.1 Dome Addr Setup 1. Joystick left/right to setup the addr type. DOME ADDR SETUP 1 ADDR TYPE PHYSIC 2 DOME ID 3 BROADCAST ID 1 OFF addr type through Physic/Logic. 2.Joystick left/right to change the dome ID(only when addr type selects logic). 3.Joystick left/right to setup the broadcast ID ON/OFF. 2.5.
Operation Manual ELI-EPTZ-27DN eLineTechnology.com 2.6.1 Zoom and Focus ZOOM AND FOCUS 1. Zoom Speed 1 ZOOM SPEED 7 2 DIGITAL ZOOM ON 3 AF SENSITIVITY HIGH Steps: [1].Move the joystick up/down to select ZOOM SPEED. [2]. Joystick left/right to setup the camera ratio speed. 2. Digital Zoom ZOOM AND FOCUS 1 ZOOM SPEED 7 2 DIGITAL ZOOM ON 3 AF SENSITIVITY HIGH Steps: [1].Move the joystick up/down to move the cursor to select DIGITAL ZOOM. [2].
Operation Manual ELI-EPTZ-27DN eLineTechnology.com 3. Shutter Speed(Shutter Speed works 4. Iris (IRIS works under Manual/IRIS under Manuel/Shutter MD) MD) Steps: Steps: [1].Joystick up/down to move the cursor to select Shutter MD [1].Joystick Up/Down to move the [2].Joystick left/right to set up Shutter [2].
Operation Manual ELI-EPTZ-27DN eLineTechnology.
Operation Manual ELI-EPTZ-27DN eLineTechnology.com 2.6.3 Others OTHERS 1. Move the joystick up/down to move the 1 SHARPNESS 5 2 BACK LIGHT OFF 3 WB MODE AUTO 4 R GAIN AUTO 5 B GAIN AUTO 6 VERTICAL MIRROR cursor to select the options. 2. Move the joystick Left/Right to set up the options. OFF 7 HORIZONTAL MIRROR OFF 8 IR SW MODE AUTO 9 STABILIZATION OFF 10 FUNCTION OSD ON 2.7 Function Programming FUNCTION PROGRAMMING Preset option 1 PRESET 1.
Operation Manual ELI-EPTZ-27DN PRESET eLineTechnology.com INPUT RANGE: 1 NUMBER 1 1~50 2 SET PRESET 64~77 102~165 001 3 CALL PRESET 0123456789 4 DELETE PRESET 5 NAME ____________ 6 NAME DISPLAY IRIS CLOSE WHEN DONE OFF 2.Set Preset [1].Move the cursor to select preset position. [2].Move the joystick left/right or OPEN to enter the setting(ensure the preset position data you desire to save) [3].
Operation Manual ELI-EPTZ-27DN eLineTechnology.com 4. Delete Preset PRESET Delete preset 1 NUMBER 1 [1].Program the desired deleting number 2 SET PRESET referring to Number Setup Section so 3 CALL PRESET as to select the preset position to be 4 DELETE PRESET deleted. 5 NAME _____________ 6 NAME DISPLAY OFF [2].Move the cursor to select Delete Preset Move the joystick left/right or press OPEN to enter the Delete Preset. ARE YOU SURE TO DO THIS? [3].
Operation Manual ELI-EPTZ-27DN eLineTechnology.com 2.7.2 Program VectorScan Function: User can make different auto scan according to various inspection. FUNCTION PROGRAMMING Programming VectorScan instruction [1].Joystick Up/Down to select Program 1 PRESET VectorScan. 2 VECTORSCAN [2].Joystick Left/Right or press OPEN to 3 PATTERN enter the programming. 4 SECTOR SETUP [3].Joystick Up/Down to select pending 5 MASK ZONE programming serial number(number 6 MASK COLOR range:1~6). 7 MOTION [4].
Operation Manual ELI-EPTZ-27DN eLineTechnology.com 2.7.3 Pattern Function: User can program three traces simulating manual operation. FUNCTION PROGRAMMING PATTERN 1 PRESET Pattern Operation Steps: 2 VECTORSCAN [1].Joystick Up/Down to move the 3 PATTERN cursor to select Pattern. 4 SECTOR SETUP [2].Joystick Left/Right or press OPEN 5 MASK ZONE to enter the menu. 6 MASK COLOR 7 MOTION [3].Joystick Up/Down to select pending PATTERN 1 NUMBER operating 1 programming Pattern(number range:1~3).
Operation Manual ELI-EPTZ-27DN eLineTechnology.com DELETE A PATTERN Delete Pattern Operation Steps: [1].Select pending Delete Pattern trace from NUMBER. [2].Joystick Up/Down to select Delete a Pattern. [3].Joystick Left/Right or press OPEN to enter and Click OPEN to delete the trace of selected Pattern as below Fig 3~Fig 4 2.7.4 Sector Setup Function: To display the sector name when dome in the setted area FUNCTION PROGRAMMING 1 PRESET Sector Setup: [1].
Operation Manual ELI-EPTZ-27DN eLineTechnology.com [2].Pan Start POS \Pan End POS\Tilt Start POS\ Tilt End POS .Move the joystick left/right or press OPEN to select a Pan Start Point \Pan End Point\ Tilt Start Point\ Tilt End Point. ⑵.IRIS OPEN when done or press CLOSE to exit, but not save. [3].Name ⑴.Select the sector name and press OPEN to enter name editing. ⑵.Edit the name referring to preset setup instruction. [4].Name Display Joystick Up/Down to move the cursor to select Name Display of ON or OFF.
Operation Manual ELI-EPTZ-27DN eLineTechnology.com 2.7.6 Mask Color Function: set the mask color. MASK COLOR 1 MASK COLOR [1]. Mask color GRAY5 2 SEMI-TRANSPARENCY OFF . Joystick Up/Down to move the cursor to select MASK COLOR. .Joystick Left/Right to move the cursor to select the Mask color. [2]. Semi-transparency .Joystick Up/Down to move the cursor to select SEMI-TRANSPAREN. ⑵.Joystick Left/Right to set up the Semi-transparency of ON/OFF. 2.7.7 Motion MOTION MOTION [1].
Operation Manual ELI-EPTZ-27DN [2].Select the Power on Action and POWER ON ACTION 1 ACTION eLineTechnology.com VECTORSCAN move the joystick left/right or press 1 OPEN to enter the Power on Action. 2 NUMBER . Select the Action and move the joystick left/right or press OPEN to enter Action. Actionincludes:None/Preset/VectorScan/Pattern/PanScan/AutoScan .Select the Number and move the joystick left/right or press OPEN to enter. Setup method: refer to preset setup instruction. [3].
Operation Manual ELI-EPTZ-27DN eLineTechnology.com ON/OFF. 2.8 System setup PARK ACTION [1].Move the joystick left/right or press 1 CLEAR MEMORY OPEN to enter submenu. 2 RESTOR DEF SETTING 3 COLOR SYSTEM [2].Move Joystick left/right to setup the NTSC 4 DOME RESET options. [3].The menu of “IR MODULE SETUP” 5 IR MODULE SETUP is invalid. 2.8.1 Clear Memory [1].Joystick Up/Down to move the cursor to select Clear Memory. [2].Joystick Left/Right or press OPEN to enter. [3].
Operation Manual ELI-EPTZ-27DN eLineTechnology.com [2].Joystick Left/Right to select the PAL or NTSC. 2.8.4 Dome Reset [1].Joystick Up/Down to move the cursor to select Dome Reset. [2].Joystick Left/Right or press OPEN to reset the dome.
Operation Manual 60 ELI-EPTZ-27DN Iris* Auto Manual Auto Manual Indoor Outdoor ATW One push WB Long distance Short distance 61 62 White balance* 63 79 Set line scanning mode 80 eLineTechnology.
Operation Manual ELI-EPTZ-27DN eLineTechnology.com Call Preset point: Press “No.” + “Shot” + “ACK”. Clear Preset point: Press “No.” + “Shot” + “OFF”. 2. Description of “cruise track” function: When enter “51+SHOT+ON”, the device is enabled system default cruise track. The device will auto scan point by point from No.1 preset position to No.16 preset position. If certain position has not been preset or been cleared after preset, “cruise track” will not scan them.
Operation Manual Chapter 4 ELI-EPTZ-27DN eLineTechnology.com Trouble Shooting of Dome Device 1.Problem description: After power on without any response, not lock motor nor images. Possible reason: The power circuit maybe have some problem Solution: Check the power cable is connected to power of AC24V. 2.
Operation Manual ELI-EPTZ-27DN eLineTechnology.com 6. Problem description: Insensitive control of dome device Possible reason: Line contact undesirable or faulty Solution: Check the control circuit 7. Problem description: Auto action of dome device periodically Possible reason: No transmission auto “call back” function is set to the dome device Solution: Called this setting 8. Problem description: After power on the device make a sound like “dada...” lasts 15 seconds.