EMMO T300 User’s Manual Read this manual completely before riding your electric bicycle 1
CONTENTS CONTENTS…………………………………………………………………………2 INTRODUCTION…………………………………………………………………..3 SPECIFICATIONS…………………………………………………………………3 SAVE RECOMMENDATION……………………………………………………..4 Ride Recommendation………………………………………………………….4 Operating Reminders and Suggestions………………………………………..4 PRODUCTV FEATURES………………………………………………………..5 FUNCTION………………………………………………………………………….6 The basis operation……………………………………………………………...6 Some Parts for Storage………………………………………………………….7 BATTERY AND CHARGING…………………………………………………….
Ⅰ.INTRODUCTION First of all thanks for your interested in our electric bike Moto 2,we promise that it will bring you different feeling when you ride it and also bring you a happy journey. The electric bike Moto is unique designed for the senior citizens or disabled people,the soft seat will protect you from the shock when you ride on uneven road.The switch controlled by your hand is easier to operate than the handle bar.
Ⅲ. SAVE RECOMMENDATION Ride Recommendation 1. Always conduct a Safety Check before you ride your Moto, Be thoroughly familiar with the controls of your. 2. Always wear shoes that will stay on your feet and will stay on the floorboard. 3. Think about your speed, and keep your speed consistent with safe operating conditions. 4. Never ride with headphones. They mask traffic sounds, distract you from concentrating on your surroundings, causing you to lose control. 5.
9. Maintain a comfortable stopping distance from all other riders, vehicles and objects. Safe braking distance and forces are subject to the prevailing weather and road conditions. Ⅳ.PRODUCT FEATURES Ⅴ.
The basis operation Figure 1 Figure 1 is the power switch of the bike , “①” turn off the power “②” turn on the power Figure 2 Figure 2 is the two speed modes switch “①” low speed position “②” fast speed position, 6
Figure 3 When you ride on your bike, at your right hand you will see three switches,as Figure 3 shows . “①”turn off the light “②”turn on the speed meter light and rear light “③”turn on the headlight,speed meter light and rear light “④”forward function “⑤”backward function “⑥”speed controller Figure 4 When you ride on your bike ,at your left hand you will see three switches as Figure 4 shows .
but do not put too heavy things , the to open the lock ,you will find that ability of this part to stand the weight there is a big storage part under is limited. the seat.You could bring something when you ride the electric bike to go everywhere if you like . Ⅵ.Battery and Charging Take out the battery 1.Open the lock between two rear lights 2.Put up the seat ,you will see the storage space ,there are seven bolts on the edge of it 3.Take out these seven bolts and then put up the storage box . 4.
3.Keep the charger and battery away from water to prevent electrical shock and shorting. The charger is intended for indoor use only. 4.Plug the end of the charger’s cord into the socket of the adaptor first. Next connect the adaptor to the Moto (the charger port in located below the front of the seat). Then plug the chargers’ AC cords into the wall outlet. 5.Read the charger label to learn about the charger indicator lights, and their meanings. 6.