Owner manual

5 - Effects
E-MU PowerFX
102 Creative Professional
E-MU PowerFX
 E-MU PowerFX are
not available at 88.2kHz,
96kHz, 176.4kHz and
192kHz sample rates.
The hardware-accelerated effects of the E-MU Digital Audio System can also be used as
VST inserts in Cubase. E-MU PowerFX allow you to use PatchMix DSP effects from
within Cubase with minimal load on your CPU.
Note: PowerFX is not supported in Vista. While many users are able to use E-MU
PowerFX with Vista with little to no problems, we are unable to offer support for
using PowerFX with Vista.
E-MU PowerFX incorporate smart time alignment technology which automatically
compensates for system latencies and ensures proper synchronization of audio
throughout the VST chain (if the host application supports this feature).
Input Signal Present
Output Signal Present
FX Presets
FX Parameters
FX Palette
E-MU PowerFX On/Off Preferences
Preset Editing
FX Inserts
 Cubase SX/SL 2.0,
Nuendo and Sonar (using
the Cakewalk VST adapter
4.4.1) implement VST 2.X
auto delay compensation.
Parameter Description
PowerFX On/Off Enables or bypasses E-MU PowerFX.
FX Palette Select from a single “Core” effect or a Multi -Effect.
FX Inserts Drop Effects from the FX Palette here.
Signal Present LEDs These indicators turn blue to show the presence of input and
output signals.
FX Parameters Select the desired effect in the center insert section, then adjust
the wet/dry mix and parameters for the effect.
FX Presets Select from the list of preprogrammed effect presets here.
Preset Editing Click here to Save, Delete, Rename or Overwrite a User Preset.
See the “User Preset Section”
for more information