Owner manual

6 - Appendix
Technical Specifications
120 Creative Professional
HEADPHONE AMP
Linear power amplifier
D/A Converter:
CS4398
Gain Range:
85 dB
Maximum Output Power:
50 mW
Output Impedance:
22 ohms
Frequency Response:
(20Hz - 20kHz): +0.0/-0.07 dB
Dynamic Range:
(A-weighted): 118.5 dB
Signal-To-Noise Ratio:
(A-weighted): 118 dB
THD+N:
(1kHz, max. gain, 600 ohm load): -96 dB (0.0015%)
Stereo Crosstalk:
(1kHz at -1dBFS, 600 ohm load): < -100 dB
PHONO INPUT
RIAA equalized phono input
Maximum Level:
Professional: 60 mV RMS
Consumer: 15 mV RMS
Input Impedance:
47K ohm
Frequency Response:
(20 Hz - 20 kHz): +0.1/-0.3 dB
Dynamic Range:
(A-weighted): 96 dB
Signal-To-Noise Ratio:
(15mV RMS unbalanced input, A-weighted): 96 dB
THD+N:
(1kHz, 15 mV RMS input): -90 dB (.003%)
Stereo Crosstalk:
(1kHz at -1dBFS): < -80 dB
Deviation from RIAA
+0.2/-0.3 dB (50Hz to 15kHz)
Input Capacitance:
220 pF
DIGITAL I/O
S/PDIF
• 2 in/2 out coaxial (transformer coupled)
• 2 in/2 out optical (software switchable with ADAT)
• AES/EBU or S/PDIF (switchable under software control)
ADAT
• 8 channels, 24-bit @ 44.1/48 kHz
• 4 channels, 24-bit @ 96 kHz (S-MUX compatible)
• 2 channels, 24-bit @ 192 kHz
MIDI
• 2 MIDI in, 2 MIDI out
SYNCHRONIZATION
Internal Crystal Sync:
44.1kHz, 48 kHz, 88.2kHz, 96 kHz, 176.4kHz, 192 kHz
External Sample Rate Sync:
ADAT (44.1kHz - 192kHz)
Optical S/PDIF (44.1kHz - 96kHz)
Coaxial S/PDIF (44.1kHz - 192kHz)
Specifications: 1616
m
PCIe