Owner manual

3 - PCIe Card & Interfaces
The MicroDock
E-MU PCIe Digital Audio Systems 21
The MicroDock
The MicroDock connects to the E-MU 1010 PCIe card via the EDI cable.
Line
A
Mic
-15
0
Line -
Mic -
Clip
+50
Line
B
Mic
+65
-15
0
48V
+50
+65
S/PDIF
In
Out
-3
-6
-12
-20
SL
Clip
-3
-6
-12
-20
SL
O
EDI
In
1L
1R
2L
2R
3L
3R
2L 2R
Out
1L
1R
Phono
Gnd
2L
2R
1
2
Out
48
VDC
+
-
MIDI Cable
3
(2) mono microphone/line inputs (2 inputs)
(2) stereo pairs of line level inputs (4 inputs)
(1) stereo pair of S/PDIF/AES digital inputs (2 inputs)
(4) stereo pairs of ADAT channels on the ADAT optical input (8 inputs)
(1) RIAA equalized turntable preamp input allows you to connect a turntable
without using an expensive external preamp. Note: These inputs are automati
-
cally disconnected when plugs are inserted into inputs 2L & 2R.
(2) MIDI input ports using the supplied breakout cable
(3) Stereo pairs of line level outputs
(1) Stereo pair driving a stereo headphone jack (Share the same routing as Line
Outs 1L/1R)
(1) Stereo pair of S/PDIF/AES digital outputs
(4) Stereo pairs of ADAT channels on the ADAT optical output
(3) Stereo 1/8” computer speaker outputs. These outputs carry the same signals as
the 3 stereo line level outputs and are provided as a convenience for connecting
computer or powered speaker systems.
(2) MIDI output ports using the supplied breakout cable
 The MicroDock is
completely “hot
pluggable”— It’s OK to
plug or unplug the
MicroDock while the
computer is turned on.
 It’s a good idea to mute
MicroDock inputs 2 in the
PatchMix DSP mixer when
nothing is plugged in,
since the turntable preamp
has a very high gain
(60dB) and could
contribute extra noise to
your mix/monitor bus.
The MicroDock provides (4) balanced analog inputs, (2) microphone preamp inputs,
(6) balanced line-level analog outputs, (3) stereo 1/8” outputs for connecting powered
computer speakers, (2) MIDI inputs, (2) MIDI outputs, a stereo headphone output,
and a RIAA equalized turntable preamp section which is “normalled” into line input 2L
and 2R, 8 channels of ADAT digital input/output, and stereo S/PDIF digital input/
output.
The inputs are configured as follows:
The outputs are configured as: