Owner manual

5 - Effects
Core Effects Descriptions
70 Creative Professional
Distortion
Most audio processors aim to provide low distortion, but not this one! The sole
purpose of this effect is to add distortion, and lots of it. This effect provides “fuzz box”
style, clipping distortion which is particularly effective on guitar, bass, organs, electric
pianos or whatever.
The input signal first passes through a lowpass filter. The Lowpass Filter Cutoff
Frequency allows you to control the number of new harmonics that will be generated
by the distortion element. The distortion element has an Edge control which controls
“how much” distortion will be added. A bandpass filter follows the distortion
generator. The EQ Center control lets you select a particular band of frequencies to be
output. The EQ Bandwidth controls the width of the center frequency band. Finally, a
gain control allows you to make up for any gain loss through the effect.
Use the Wet/Dry mix control in conjunction with the Edge control to reduce the
amount of distortion, or go wild and turn everything to 11!
In
Edge
Lowpass
Filter
Bandpass
Filter
EQ Center
LP Filter
Cutoff
GainEQ BW
Ou
t
Distortion
Signal path = Stereo
Parameter Description
Pre EQ LP Cutoff Controls the amount of high frequency audio admitted to
the distortion. Range: 80Hz to 24kHz
Edge Sets the amount of distortion and new harmonics
generated. Range: 0-100
Gain Sets the output volume of the effect. Range: -60dB to 0dB
Post EQ Center Freq. Sets the frequency of the output bandpass filter.
Range: 80Hz to 24kHz
Post EQ Bandwidth Sets the width of the output bandpass filter.
Range: 80Hz to 24kHz