Digital Audio System Owner's Manual E-MU 1616/1616M CardBus Digital Audio System 1
E-MU 1616/1616m CardBus Digital Audio System Owner’s Manual © 2003 E-MU Systems All Rights Reserved Software Version: 1.81 E-MU World Headquarters Europe, Africa, Middle East E-MU Systems Creative Labs 1500 Green Hills Road Ballycoolin Business Park Scotts Valley, CA Blanchardstown 95066 Dublin 15 USA IRELAND 2 E-MU Japan Creative Media K K Kanda Eight Bldg.
Table of Contents 1- Introduction ................................................................. 7 Welcome!.............................................................................................................................. 7 The E-MU 02 CardBus Card ............................................................................................ 7 E-MU MicroDock ............................................................................................................. 7 E-MU 1616M System .......
- The PatchMix DSP Mixer ............................................. 21 PatchMix DSP..................................................................................................................... 21 Overview of the Mixer........................................................................................................ 21 Mixer Window ................................................................................................................ 22 Mixer Block Diagram .........................
- Effects ....................................................................... 47 Overview............................................................................................................................. 47 The Effects Palette............................................................................................................... 47 FX Insert Chains .............................................................................................................
Cinch (RCA) to 1/4” Adapters ................................................................................... 85 Digital Cables ................................................................................................................. 85 AES/EBU to S/PDIF Cable Adapter ............................................................................... 85 Grounding ...................................................................................................................... 86 Phantom Power ...
1- Introduction Welcome! 1- Introduction Welcome! Thank you for purchasing the E-MU 1616 or E-MU 1616m CardBus Digital Audio System. Your computer is about to be transformed into a powerful audio processing workstation. We’ve designed this E-MU digital audio system to be logical, intuitive and above all, to provide you with pristine sound quality. These systems offer unprecedented quality and value by providing studio-class, 24-bit/192kHz multi-channel recording and playback to any CardBus equipped PC.
1- Introduction Welcome! E-MU 1616M System The E-MU 1616m system includes the MicroDockM, and is a no compromise, mastering-grade system, which includes all the features of the 1616 system. The 1616M system is distinguished by the addition of ultra-high performance 24-bit/192kHz A/D - D/A converters which deliver an unbelievable 120dB dynamic range.
2 - Installation Setting up the 1616 or 1616m system 2 - Installation Setting up the 1616 or 1616m system There are four basic steps to installing your E-MU system: 1. Install the E-MU 02 CardBus card in your computer. Go there. 2. Install the PatchMix DSP software and drivers onto your computer. 3. Connect the MicroDock to the 02 CardBus Card using the supplied EDI cable. 4. Connect audio, MIDI and synchronization cables between the E-MU system and your other gear.
2 - Installation Installing the CardBus Card and Software Installing the CardBus Card and Software Plug in the E-MU 02 CardBus Card To plug the 02 CardBus Card into your computer 1. Turn on your computer and wait for it to finish loading Windows. 2. Insert the E-MU 02 CardBus card into the CardBus slot on your PC with the symbol up. The CardBus card cannot be incorrectly inserted. 3. With CardBus card connected, continue to the software installation.
2 - Installation Connecting the MicroDock Note About Windows Logo Testing When you install the Digital Audio System drivers, you will see a dialog box that informs you that the driver has not passed Windows Logo testing. The Digital Audio System drivers are not signed because the driver does not support some of the consumer audio features that the Microsoft driver signing program requires, most notably Digital Rights Management.
2 - Installation Connecting the MicroDock 12 Creative Professional
3 - CardBus Card & MicroDock The E-MU 02 CardBus Card 3 - CardBus Card & MicroDock The E-MU 02 CardBus Card The E-MU 02 CardBus card is the heart of the system and contains E-MU’s powerful E-DSP chip. The powerful hardware DSP on this little card leaves more CPU power free on your computer for additional software plug-ins and other tasks.
3 - CardBus Card & MicroDock The MicroDock The MicroDock The MicroDock connects to the E-MU 02 CardBus card via the EDI cable.
3 - CardBus Card & MicroDock The MicroDock Front Panel Connections Preamp Section The front panel mono Mic/Line inputs A & B can be used as balanced microphone inputs, hi-Z guitar pickup inputs, or line level inputs. The Neutrik combination jack accepts microphones using a standard XLR connector or line level/hi-Z inputs (such as an electric guitar) using a standard 1/4 inch TRS/TS connector.
3 - CardBus Card & MicroDock The MicroDock ADAT Optical Digital Input & Output The ADAT optical connectors transmit and receive 8 channels of 24-bit audio using the ADAT type 1 & 2 formats. The word clock contained in the input data stream can be used as a word clock source. See System Settings. Optical connections have certain advantages such as immunity to electrical interference and ground loops. Make sure to use high quality glass fiber light pipes for connections longer than 1.5 meters. At the 88.
3 - CardBus Card & MicroDock The MicroDock Front Panel Analog Connections Mic Use the 3-pin XLR jack for Low Impedance microphones. A Line B Line Mic Clip SL Mic Clip -3 -6 -12 -20 SL S/PDIF 48V -3 -6 -12 -20 Out In Line Mic - +50 +65 -15 0 -15 0 +50 +65 On/Off Off & Phone Volume Use the center Phone Jack for High Impedance instruments such as electric guitar or bass.
3 - CardBus Card & MicroDock The MicroDock Rear Panel Connections 4 Balanced Line Level Inputs Turntable Inputs (configured as 2 stereo pairs) (tied to line input 2) 1L 1R 2L 2R 2L Phono 2R Turntable Ground MIDI Port Connector 48 Volt DC Power Input MIDI Cable Gnd 48 VDC + - In Out 1 2 3 EDI Out 1L 1R 2L 2R 3L 6 Balanced Line Level Outputs (configured as 3 stereo pairs) 3R Alternate Outputs (same as outputs 1-3) Connect to E-MU 02 CardBus Card Line Level Analog Inputs 4 balanced
3 - CardBus Card & MicroDock The MicroDock Computer Speaker Analog Outputs These stereo mini-phone (3.5mm) jacks duplicate line level outputs 1-3 with a lower output level to accommodate consumer speakers. These line level outputs are designed to interface easily with powered speakers.
3 - CardBus Card & MicroDock The MicroDock 5.1 Surround Speaker Connections Center Left Front 1L 1R 2L 2R 2L Phono 2R MIDI Cable Gnd 48VDC + - In Right Front Out 2 1 3 EDI Out 1L 1R 2L 2R 3L 3R Left Rear Right Rear Front Rear Ctr/Sub Sub-Woofer (with built-in power amps) The 1/8” stereo jacks make it easy to connect to powered surround sound speakers. Only three stereo cables are necessary with many speaker systems (see above). The 1/8” jacks duplicate the 1/4” outputs.
4 - The PatchMix DSP Mixer PatchMix DSP 4 - The PatchMix DSP Mixer PatchMix DSP The PatchMix DSP Mixer is a virtual console which performs all of the functions of a typical hardware mixer and a multi-point patch bay. With PatchMix, you may not even need a hardware mixer.
4 - The PatchMix DSP Mixer Overview of the Mixer Mixer Window The Mixer consists of four main sections. Application Toolbar Lets you manage sessions and show/hide the various views. Main Section Controls all the main levels, aux buses, and their inserts. This section also has a “TV” which shows parameters for the currently selected effect and the input/output patching. It also shows the session’s current sample rate and whether it’s set to internal or external clock.
4 - The PatchMix DSP Mixer E-MU Icon in the Windows Taskbar E-MU Icon in the Windows Taskbar Right-clicking on the E-MU icon in the Windows taskbar calls the following window. Right-Click Here Opens the PatchMix DSP Mixer. Calls the PatchMix DSP help system. Disables the splash screen that appears at boot-up. When unchecked, FX are not loaded until needed, resulting in faster computer boot. Restores the default PatchMix DSP and driver settings.
4 - The PatchMix DSP Mixer The Session The Session The current state of the PatchMix DSP mixer (fader settings, effects routings…everything!) can be saved as a Session. Whenever you create or modify a mixer setup, all you have to do is Save it to be able to recall it at a later time. Before you begin using PatchMix DSP, you need to set it up to be compatible with the other software applications you may be running. The most important consideration is your system sample rate.
4 - The PatchMix DSP Mixer The Session You can now select one of the factory template sessions. The factory templates are preprogrammed with specific setups such as audio recording or mixing. The selector tabs categorize Template Sessions into three groups based on sample rate, 44.1k/48k, 88k/ 96k, or 176k/192k. You can create your own templates by simply copying or saving sessions into the “Session Templates” folder (Program Files\Creative Professional\E-MU PatchMix DSP\Session Templates).
4 - The PatchMix DSP Mixer The Session The System Settings include the following: • Internal/External Clock Selects between internal or external word clock source as the master clock source for the system • Sample Rate Selects the sample rate when using internal clock. Your choices are: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz. • External Clock Source (ext. clock only) Select from: ADAT, or S/PDIF as an external sample clock source.
4 - The PatchMix DSP Mixer The Session Input Level Settings Output Level Settings Optical Input Select Optical Output Select Mic Soft Limiting On/Off S/PDIF Output Format • Inputs +4 or -10 Selects between Consumer level (-10dBV) or Professional level (+4dBu) inputs. (Use the -10dBV setting if your input is too weak.) • Outputs +4 or -10 Selects between Consumer level (-10dBV) or Professional level (+4dBu) outputs. (The +4 dBu setting outputs a hotter level.
4 - The PatchMix DSP Mixer Input Mixer Strips Input Mixer Strips PatchMix DSP Input Mixer Strips are stereo except for the MicroDock Mic/Line inputs. Each input mixer strip can be divided into four basic sections. • Insert Section Effects, EQ, External/Host Sends & Returns can be inserted into the signal path. • Pan Controls These controls position the signal in the stereo sound field. • Aux Sends Used to send the signal to sidechain effects or to create separate mixes.
4 - The PatchMix DSP Mixer Mixer Strip Creation Mixer Strip Creation PatchMix DSP is a dynamically configurable mixer. Each mixer session can contain an arbitrary number of strips up to a limit set by the number of available input sources and available DSP resources. • Host refers to a computer application such as Cubase. • Physical refers to a hardware input or output such as an output jack. To Add a New Strip: f Adding or deleting a strip “defragments” the effect/DSP resources.
4 - The PatchMix DSP Mixer Mixer Strip Creation To Delete a Mixer Strip: 1. Click the top of the mixer strip you wish to delete. A red border appears around the strip, indicating that it is selected. 2. Click on the Delete Mixer Strip button, or right-click and choose Delete, or use the Delete key on the PC keyboard. See Overview of the Mixer. Multichannel WAVE Files The 1616 supports 2 channels of WAVE recording and 8 channels of multichannel WAVE playback.
4 - The PatchMix DSP Mixer Mixer Strip Creation Insert Section The Insert Section is next in line. PatchMix DSP effects can be selected from the Effects Palette and dropped into the insert locations. See “The Effects Palette”. Any number of effects can be inserted in series. The Inserts also have the unique ability to patch into ASIO/WAVE and external equipment. ASIO/WAVE Sends, External Sends and External Send/Returns can be dropped into the insert section to route the signal anywhere you want.
4 - The PatchMix DSP Mixer Mixer Strip Creation The Insert Menu Right-Clicking over the insert section brings up a pop-up selection box containing various insert options to help you control and manage your inserts. To Add a Send Insert: This type of insert send splits the signal at the insert point and sends it out to the selected destination. (An “ASIO Send” becomes an input on your recording application, a “Physical Out” goes to a pair of output jacks.
4 - The PatchMix DSP Mixer Mixer Strip Creation Input To Physical Output From Physical Input Insert Send/Return Panning Fader If the source or destination you want to use is not available in the list, they are probably already being used elsewhere. Check the input Strips, Inserts and Output Assignments. Aux 1 Bus Aux 2 Bus Main Output Bus 3. Choose one of the Send Outputs. Click on a destination to select it. 4. Choose one of the Return Inputs. Click on a source to select it. 5.
4 - The PatchMix DSP Mixer Mixer Strip Creation To Add an ASIO Direct Monitor Send/Return: 1. Right-Click over the Insert section. A pop-up dialog box appears. 2. Select Insert ASIO Direct Monitor from the list of options. The following dialog box appears. 3. Choose one of the Send Outputs. Click on a destination to select it. 4. Choose one of the Return Inputs. Click on a source to select it. 5. Click OK to select the Send and Return, or Cancel to cancel the operation.
4 - The PatchMix DSP Mixer Mixer Strip Creation The insert meters are also useful to monitor incoming digital signals such as ADAT, ASIO or S/PDIF to make sure the mixer is receiving a proper signal level. They’re also great for troubleshooting, since you can place them virtually anywhere in the mixer. To Insert a Meter 1. Right-Click on an Insert location of the mixer strip. A pop-up dialog box appears. 2. Select Insert Peak Meter. A stereo peak meter appears in the insert location. 3.
4 - The PatchMix DSP Mixer Mixer Strip Creation have to go back and adjust the I/O Settings. Choose “-10” if the input signal is too weak and “+4” if the signal is too strong. Digital audio has NO headroom past 0dBFS (FS = Full Scale) and will “hard clip” if the signal exceeds 0dB. Hard clipping sounds bad and will ruin your recording. Hard clipping occurs because at 0dBFS, all 24 bits are turned on and the A-D cannot measure any higher level.
4 - The PatchMix DSP Mixer Mixer Strip Creation To Add a Trim Pot Insert 1. Right-Click over any of the Insert sections. A pop-up dialog box appears. 2. Select Insert Trim Control from the list of options. A Trim Pot insert appears in the insert location. 3. Click on the Trim Pot insert to view and adjust the controls in the TV screen. 4. To move the Trim Pot to another location, simply drag and drop it into the desired position.
4 - The PatchMix DSP Mixer Mixer Strip Creation Managing Your Inserts To Delete an Insert: 1. Right-Click over the Insert you wish to delete. A yellow line around the insert location indicates that it is selected. A pop-up dialog box appears. 2. Select Delete Insert to remove the selected insert or select Delete All Inserts to remove all inserts. f Tip: Select the Insert and press the Delete key to delete the plug-in from the strip. 3. The insert(s) are deleted from the insert chain.
4 - The PatchMix DSP Mixer Mixer Strip Creation Aux Section The Auxiliary Sends tap the signal from the channel strips and sum them together before sending the mix to the Auxiliary Effects section. In a traditional mixing console, aux sends are used to send part of the signal to outboard effect devices, then return the effected signal back into the mix using the effect returns.
4 - The PatchMix DSP Mixer Mixer Strip Creation Pre or Post Fader Aux Sends When you create a New Mixer Strip you have the option to place both Aux Sends after the channel volume fader and mute control or you can place them before the fader and mute. Post-Fader turns down the send level as you lower the volume of the strip. With Pre-Fader selected, you may still hear the effected signal returning from one of the Aux Buses with the volume fader turned down.
4 - The PatchMix DSP Mixer Mixer Strip Creation Level, Pan, Solo & Mute Controls Pan Controls Aux Send Amount Controls The Pan control comes before the Level Control and Aux Sends in the signal flow. On stereo strips we use an unconventional pan section with two pan pots – one for the left part of the signal and one for the right part of the signal. This feature allows you to independently position both sides of the stereo signal.
4 - The PatchMix DSP Mixer Main Section Main Section Physical/Host Select Buttons View Selection Buttons “TV” Screen Aux Insert Section Master Aux Send Amounts Main Insert Section Master Aux Return Amounts Sync & Sample Rate Indicators Monitor Controls Output Fader & Meters Session Name The main section contains all controls for controlling the main mix elements as well as a “TV screen” for viewing the input/output routing or parameters of the selected insert.
4 - The PatchMix DSP Mixer Main Section TV Screen & Selectors The “TV screen” at the top of the main section is a multi-function display and control center for the input and output routings and effect controls. The three buttons at the top of the display select the current function of the display—Effect, Inputs or Outputs. Effect Select the Effect display view in the main section, then click on an Effect Insert to display the effect parameters.
4 - The PatchMix DSP Mixer Main Section Input Selecting the Input display view shows a graphic representation of the PatchMix DSP Mixer inputs. This screen is only a display, unlike the Effects and Outputs screens, which allow you to make routing changes. Input routing changes are made by adding mixer strips. See Mixer Strip Creation. The input routings are divided into two categories: Physical Inputs and Host Inputs. Select either category by clicking on the Physical or Host button.
4 - The PatchMix DSP Mixer Main Section Auxiliary Effects & Returns The section immediately below the TV Screen is where you assign the Auxiliary Effects. In a traditional mixing console, auxiliary effects sends are used to send part of the signal to outboard effect devices, then return the effected signal back into the mix using the effect returns. This is called a sidechain routing because the aux signal takes a detour through the effects before being summed back into the main mix.
4 - The PatchMix DSP Mixer Main Section Output Section Clip Indicators Main Output Level Fader Sync/Sample Rate Indicators Main Insert Section Monitor Mute Monitor Balance Output Level Meters Monitor Volume Main Inserts The main inserts allow you to apply effects to the main stereo signal coming out of the mixer (both mains and monitor). You might want to apply EQ or a compressor here.
5 - Effects Overview 5 - Effects Overview PatchMix DSP comes complete with a host of great core DSP effects including Compressors, Delays, Choruses, Flangers and Reverb. Each 32-bit effect has various parameters for editing, as well as factory presets. You can also create and save as many of your own effect presets as you wish. Since the effects are implemented in hardware, they don’t place any load on your host computer.
5 - Effects The Effects Palette To Select an Effect 1. Click the FX button to bring up the Effects Palette. The effect palette contains numerous folders containing effects presets. Click on any folder to open it. 2. Select the effect you wish to use by clicking on it with the left mouse button and while continuing to hold the mouse button, drag the effect into the desired location on the PatchMix DSP mixer screen and release the mouse button.
5 - Effects The Effects Palette Creating, Renaming & Deleting Categories or Presets There are several utilities to help you organize your effects presets. To Create a New Preset Category You can create your own category folders to help organize your effects presets. 1. Left-click on the New Folder icon at the top of the Effects Palette. A pop-up dialog box appears asking you to “Enter the Name of the New Category.
5 - Effects The Effects Palette Importing and Exporting Core FX Presets and FX Insert Chains These utilities make it easy to import or export your FX Presets and FX Insert Chains. You can share presets with your friends or download new presets from the Internet. To Import Core FX Presets This option imports complete folders of Core FX presets into the E-MU PatchMix DSP folder (normally located here: “C:\Program Files\Creative Professional\E-MU PatchMix DSP\Core Effects”).
5 - Effects FX Edit Screen FX Edit Screen Click on an FX Insert to display the parameters for that effect. If an insert effect is not selected, the FX display will read “No Insert”. Most effects have a wet/dry mix parameter to control the ratio of effect-to-plain signal. The wet/dry setting is stored with the FX preset. The effect parameters vary with the type of effect.
5 - Effects FX Edit Screen Method #2 1. Right-click over the Insert Effect you want to Solo (in the Insert section). A pop-up menu appears. 2. Select “Solo Insert” from the list of options. The other Insert Effect names in the strip will “gray-out” to indicate that they are bypassed. To Bypass ALL All the inserts in a strip can be bypassed with a single command. 1. Right-click over any Effect in the Insert section. A pop-up menu appears. 2. Select “Bypass All Inserts” from the list of options.
5 - Effects FX Edit Screen To Delete a User Preset 1. Select the user preset you wish to delete from the user preset menu. 2. Click on the Edit button. A pop-up menu appears. 3. Select Delete. A pop-up dialog box appears asking you to confirm your action. 4. Click OK to delete the preset or No or Cancel to cancel the operation. To Rename a User Preset 1. Select the user preset you wish to rename from the user preset menu. 2. Click on the Edit button. A pop-up menu appears. 3. Select Rename.
5 - Effects List of Core Effects List of Core Effects Stereo Reverb Frequency Shifter Mono Delay 750 Lite Reverb Auto-Wah Mono Delay 1500 Compressor Vocal Morpher Mono Delay 3000 Leveling Amp 1-Band Para EQ Stereo Delay 100 Chorus 1-Band Shelf EQ Stereo Delay 250 Flanger 3-Band EQ Stereo Delay 500 Distortion 4-Band EQ Stereo Delay 750 Speaker Sim Mono Delay 100 Stereo Delay 1500 Rotary Mono Delay 250 Phase Shifter Mono Delay 500 DSP Resource Usage There are two main factors whic
5 - Effects Core Effects Descriptions Core Effects Descriptions 1-Band Para EQ This single band parametric equalizer is useful when you just want to boost or cut a single range of frequencies. For example, if you just want to brighten up the lead vocal a bit, you might choose this EQ. This EQ offers up to ±15dB cut or boost. +15dB Boost Width Gain + Cut -15dB Center Frequency Parameter Description Gain Sets the amount of cut (-) or boost (+) of the selected frequency band.
5 - Effects Core Effects Descriptions 3-Band EQ This versatile equalizer provides two shelving filters at the high and low ends of the frequency range and a fully parametric band in the center. Up to ±24 dB of boost or cut is provided for each band. Low Shelf Corner Freq. Boost + Cut +24dB Gain Mid Band - High Shelf Corner Freq. E Note: The Wet/Dry Mix control on an equalizer should normally be set to 100% wet or unpredictable results may occur.
5 - Effects Core Effects Descriptions 4-Band EQ This 4-band equalizer provides two shelving filters at the high and low ends of the frequency range and two fully parametric bands in the center. Up to ±24 dB of boost or cut is provided for each band. Note: The Wet/Dry Mix control on an equalizer should normally be set to 100% wet or unpredictable results may occur. For more information about setting up a parametric EQ, see page 56.
5 - Effects Core Effects Descriptions Auto-Wah This effect creates the sound of a guitar wah-wah pedal. The “Wah” filter sweep is automatically triggered from the amplitude envelope of the input sound. Auto-wah works well with percussive sounds such as guitar or bass. The Auto-Wah is a bandpass filter whose frequency can be swept up or down by an envelope follower, which extracts the volume contour of the input signal.
5 - Effects Core Effects Descriptions Chorus An audio delay in the range of 15-20 milliseconds is too short to be an echo, but is perceived by the ear as a distinctly separate sound. If we now vary the delay time in this range, an effect called chorus is created, which gives the illusion of multiple sound sources. A slight amount of feedback serves to increase the effect. A very slow LFO rate is usually best for a realistic effect, but a faster LFO rate can also be useful with minimal LFO depth (.2).
5 - Effects Core Effects Descriptions Basic Controls The three main controls of a compressor are the Ratio control, the Threshold control and the Gain control. If the signal falls below the Threshold, no processing will take place. Signals exceeding the Threshold will have gain reduction applied as set by the ratio control. This important control allows you to dial in the range of amplitudes you want to tame.
5 - Effects Core Effects Descriptions Parameter Description Attack Time Controls how quickly the gain is turned down after the signal exceeds the threshold. Range .1ms to 500ms Release Time Controls how fast the gain is returned to its normal setting after the signal has fallen below the threshold. Range: 50ms to 3000ms Pre-Delay Allows the use of slower attack times without missing signal peaks. Range: 0ms to 3 ms Input Meter Allows you to monitor the strength of the input signal.
5 - Effects Core Effects Descriptions Flanger A flanger is a very short delay line whose output is mixed back together with the original sound. Mixing the original and delayed signals results in multiple frequency cancellations known as a comb filter. Since the flanger is a type of filter, it works best with harmonically rich sounds. A low frequency oscillator is included to slowly change the delay time. This creates a rich, sweeping effect as the notches move up and down across the frequency range.
5 - Effects Core Effects Descriptions Freq Shifter This unusual effect is sometimes called “spectrum shifting” or “single sideband modulation”. Frequency shifting shifts every frequency in the signal by a fixed number of Hz which causes the harmonics to lose their normal relationship. The more common pitch shifter, in contrast, preserves the harmonic relationships of the signal and so is better suited to creating “musical” harmonies. This isn’t to say that the frequency shifter can’t be used musically.
5 - Effects Core Effects Descriptions Leveling Amp The first compressors developed in the 1950’s were based on a slow-acting optical gain cells which were able to control the signal level in a very subtle and musical way. This effect is a digital recreation of the leveling amps of yesteryear. The leveling amp uses a large amount of “lookahead delay” to apply gentle gain reduction. Because of this delay, the leveling amp is not suitable for applications which require realtime monitoring of the signal.
5 - Effects Core Effects Descriptions Lite Reverb Reverberation is a simulation of a natural space such as a room or hall. The Lite Reverb algorithm is designed to simulate various rooms and reverberation plates while using fewer DSP resources than the Stereo Reverb. Up to five Lite Reverbs can be used at once. Decay time defines the time it takes for the reflected sound from the room to decay or die away. The diagram below shows a generalized reverberation envelope.
5 - Effects Core Effects Descriptions Mono Delays - 100, 250, 500, 750, 1500, 3000 A delay line makes a copy of the incoming audio, holds it in memory, then plays it back after a predetermined time. The delay number refers to the maximum delay time that can be produced by the delay line. The six lengths, from 100 ms to 3 seconds, allow you to make the most efficient use of the effect memory resource. Long delays produce echoes, short delays can be used for doubling or slapback effects.
5 - Effects Core Effects Descriptions Phase Shifter A phase shifter produces a fixed number of peaks and notches in the audio spectrum which can be swept up and down in frequency with a low frequency oscillator (LFO). This creates a swirly, ethereal sound with harmonically rich sound sources of a type of pitch shift with simpler sounds. The phase shifter was invented in the 1970’s and the characteristic sound of this device evokes emotions of that musical era.
5 - Effects Core Effects Descriptions Speaker Simulator The Speaker Simulator provides realistic guitar speaker responses and is designed for use with guitar, bass or synthesizer. Twelve popular guitar amp speaker cabinets are modeled. There is only one parameter on this effect. Just select the speaker you want and listen. Normally this effect should be used with the Mix control set to 100%. Speaker Type Description British Stack 1 & 2 Modeled from a British 8-speaker high power amplifier stack.
5 - Effects Core Effects Descriptions Stereo Delays - 100, 250, 500, 750, 1500 The Stereo Delays are true stereo delay lines in that the left and right channels are kept entirely separate from each other. The delay number refers to the maximum delay time that can be produced by the delay lines. The five different lengths, from 100 ms to 1.5 seconds, allow you to make the most efficient use of the effect memory resource.
5 - Effects Core Effects Descriptions Stereo Reverb Reverberation is a simulation of a natural space such as a room or hall. The stereo reverb algorithm is designed to simulate various halls, rooms and reverberation plates. Decay time defines the time it takes for the reflected sound from the room to decay or die away. The diagram below shows a generalized reverberation envelope. Early Reflections Late Reverb Time After a short pre-delay period, the echoes from the closest walls or ceiling are heard.
5 - Effects Core Effects Descriptions Vocal Morpher This unique effect allows you to select two vocal phonemes and morph between them using an LFO. Phonemes are the consonants and vowels we use in articulating speech sounds and these sounds are very distinctive and evocative. 30 different phonemes are available and these can be shifted up or down in pitch for even more effects. To use the Vocal Morpher, you just select Phoneme A and Phoneme B from the list of thirty.
5 - Effects E-MU PowerFX E-MU PowerFX The hardware-accelerated effects of the E-MU Digital Audio System can also be used as VST inserts in Cubase. E-MU PowerFX allow you to use PatchMix DSP effects from within Cubase with minimal load on your CPU. E-MU PowerFX incorporate smart time alignment technology which automatically compensates for system latencies and ensures proper synchronization of audio throughout the VST chain (if the host application supports this feature).
5 - Effects E-MU PowerFX Parameter Description Preferences The Preferences menu allows you to: • Toggle the Tooltips On or Off • Extra Buffers - Check this box if excessive stuttering occurs when using E-MU PowerFX in your VST Host application. This box should be checked when using Fruity Loops. • Render Mode - Induces realtime rendering in applications which do not support realtime rendering (WaveLab, SoundForge). To Setup & Use E-MU PowerFX: Setup Cubase or Cubasis 1. Launch Cubase or Cubasis. 2.
5 - Effects E-MU PowerFX Automating E-MU PowerFX E-MU PowerFX can be automated in Cubase LE (or other recording host) just like any other VST effect. When “Write Automation” is activated in Cubase, control changes made in the PowerFX window during playback will be recorded on a special “Automation Subtrack”. When “Automation Read” is activated, the recorded control changes will be played back. Steinberg Cubasis does not have the control automation feature.
5 - Effects E-MU PowerFX E-MU PowerFX Compatibility Chart Application Name Compatible? Note Render Extra Buffers Steinberg Cubase VST 5.
5 - Effects Rendering Audio with E-MU PowerFX Rendering Audio with E-MU PowerFX Rendering (sometimes called Export) is a mixdown process performed by the host application, which creates a new digital audio file from a multitrack song. Rendering allows a virtually unlimited number of VST effects to be used because the audio processing is performed out of realtime. E-MU PowerFX and the PatchMix DSP effects are strictly realtime processes.
5 - Effects E-MU VST E-Wire E-MU VST E-Wire E-Wire is a special VST/ASIO Bridge which allows you to route digital audio via ASIO to PatchMix and back again. E-Wire VST incorporates smart time alignment technology that automatically compensates for system latencies and ensures proper synchronization of audio throughout the VST chain. In addition, E-Wire also allows you to insert outboard audio gear into the VST environment.
5 - Effects E-MU VST E-Wire To Setup and use E-Wire: Setup PatchMix DSP 1. Open PatchMix DSP application. 2. Insert an ASIO Input mixer strip into PatchMix DSP. (Alternately, you can select “New Session”, select “E-Wire Example” and skip to step 6.) 3. Mute the strip or turn the Fader all the way down. 4. Insert an ASIO Send plug-in into one of the inserts on your ASIO strip. 5. Name your ASIO strip as an E-Wire strip. 6. Insert the desired PatchMix DSP effects into slots above the ASIO Send. 7.
5 - Effects E-MU VST E-Wire Currently automatic delay compensation is supported by the Steinberg 2.0 family (Nuendo 2.x, Cubase SX 2.0), Magix Samplitude 7.x, and Sonar (using the Cakewalk VST adapter 4.4.1), but not, unfortunately, by Steinberg Cubase VST 5.1, Cubase LE and Cubasis. The E-Delay Compensator utility plug-in is used to manually compensate for the transfer delay for hosts that DO NOT support plug-in delay compensation.
5 - Effects E-MU VST E-Wire In practical use, however, you’ll probably never need to use more than one E-Wire VST on a single track since PowerFX effects can be placed in series. We have included this feature “just in case” you need it. Here’s one more example of how to use the E-Delay Compensator with different numbers of PowerFX/E-Wire sends on each track. The delay compensation on each track must equal the track with the maximum number of PowerFX/E-Wire sends. See the diagram below.
6 - Appendix Using High Sample Rates 6 - Appendix Using High Sample Rates Overview When operating at 176.4k or 192k sample rates, the mixer functionality and number of I/O channels are slightly reduced. The number of ADAT channels also decreases at the 88k/96k and 176/192k sample rates (due to the bandwidth limitations of the optical components). When using 88.2kHz, 96kHz, 176.4kHz or 196kHz sample rates: • Effect processors are disabled. (Output sends & returns are still available.
6 - Appendix Using High Sample Rates At the 192kHz sample rate, you may choose one of these three options: 1. Keep all Analog I/O, but lose S/PDIF 3. Keep S/PDIF & ADAT, but lose 2. Keep all Analog I/O, but lose ADAT Line Inputs 2L/2R & Line Outputs 3L/3R E-MU 1616 Hardware Inputs & Outputs at 176.
6 - Appendix Using High Sample Rates WDM Recording and Playback Behavior WDM recording and playback is supported at all PatchMix sample rates. The behavior of the driver with respect to PatchMix sample rate is described below. When PatchMix and the WDM audio content (.WAV file format, playback and record settings in WaveLab. etc.
6 - Appendix Useful Information Useful Information Cables - balanced or unbalanced? All inputs and outputs on the E-MU Digital Audio System are designed to use either balanced or unbalanced cables. Balanced signals provide an additional +6dB of gain on the inputs and are recommended for best audio performance, although unbalanced cables are fine for most applications. If you’re having problems with hum and noise or just want the best possible performance, use balanced cables.
6 - Appendix Useful Information 1/8” Mini-phone to 1/4” Adapters To connect headphones with an 1/8” (mini-phone) plug to the headphone jack on the MicroDock, you need a 1/8” to 1/4” adapter. These handy devices are available at electronic department stores everywhere. Headphones with 1/8" plug 1/8" to 1/4" Headphone Adapter Cinch (RCA) to 1/4” Adapters Equipment (such as consumer audio gear) which uses Cinch/RCA type connectors can be connected to the MicroDock using readily available adapter cables.
6 - Appendix Useful Information Grounding In order to obtain best results and lowest noise levels, make sure that your computer and any external audio devices are grounded to the same reference. This usually means that you should be using grounded AC cables on both systems and make sure that both systems are connected to the same grounded outlet. Failure to observe this common practice can result in a ground loop. 60 cycle hum in the audio signal is almost always caused by a ground loop.
6 - Appendix Technical Specifications Technical Specifications Specifications: 1616m System GENERAL Sample Rates 44.1 kHz. 48 kHz, 96 kHz, 192 kHz from internal crystal Accepts externally supplied clock from S/PDIF or ADAT Bit Depth 16 or 24-bits Hardware DSP 100MIPs custom audio DSP. Zero-latency direct hardware monitoring with effects Converters & OpAmps ADC - AK5394 (AKM) DAC - CS4398 (Cirrus Logic) OpAmp - NJM2068M, NJM2122, NJM2082 (JRC) WDM Drivers 2-in/8-out at 44.1kHz, 48kHz, 88.
6 - Appendix Technical Specifications Specifications: 1616m System MIC PREAMP/LINE INPUT HI-Z LINE INPUT Gain Range: -15 to +51 dB Max Level: 19 dbV (21.2 dBu) THD+N: -105 dB (.00056%), -1 dBFS, 20kHz BW SNR: 118 dB, (A-weighted, 20kHz BW) Dynamic Range: 118 dB, (A-weighted, 20kHz BW) Crosstalk: Minimum Gain: -140 dB (1kHz) Maximum Gain: -80 dB (1kHz) Frequency Response: +0.10/-0.00 dB, 20 Hz - 20 kHz Input Impedance: 1M ohm CMRR: -44 dB (60Hz) MICROPHONE PREAMP Gain Range: -1.
6 - Appendix Technical Specifications Specifications: 1616m System CARD HEADPHONE AMP Frequency Response: +0.05/-0.0 dB, 20 Hz - 20 kHz THD+N: 24 ohm load: -80 dB (0.01%) 65 ohm load: -85 dB (0.0056%) 600 ohm load: -96 dB (0.
6 - Appendix Technical Specifications Specifications: 1616 System GENERAL Sample Rates 44.1 kHz. 48 kHz, 88.2kHz, 96 kHz, 176.4kHz & 192 kHz from internal crystal. Accepts externally supplied clock from S/PDIF or ADAT Bit Depth 16 or 24-bits Hardware DSP 100MIPs custom audio DSP. Zero-latency direct hardware monitoring with effects Converters & OpAmps ADC - PCM1804 (TI) DAC - CS4392 (Cirrus Logic) OpAmp - NJM2068M, NJM2122, NJM2082 (JRC) WDM Drivers 2-in/8-out at 44.1kHz, 48kHz, 88.
6 - Appendix Technical Specifications Specifications: 1616 System MIC PREAMP/LINE INPUT HI-Z LINE INPUT Gain Range: -15 dB to +51 dB Max Level: 19.5 dbV THD+N: -101 dB (.0009%), -1 dBFS, 20kHz BW SNR: 110 dB, (A-weighted, 20kHz BW) Dynamic Range: 110 dB, (A-weighted, 20kHz BW) Crosstalk: Minimum Gain: -140 dB (1kHz) Maximum Gain: -80 dB (1kHz) Frequency Response: +0.0/-0.
6 - Appendix Technical Specifications Specifications: 1616 System CARD HEADPHONE AMP Frequency Response: +0.05/-0.0 dB, 20 Hz - 20 kHz THD+N: 24 ohm load: -80 dB (0.01%) 65 ohm load: -85 dB (0.0056%) 600 ohm load: -96 dB (0.
6 - Appendix Technical Specifications Dimensions & Weight MICRODOCK MicroDock Weight: 2.27 lb / 1.03 kg Dimensions: W: 7.25" H: 1.625" L: 7.75" W: 184 mm H: 41 mm L: 196 mm 02 CardBus Card Weight: 0.095 lb / 0.043 kg Dimensions: W: 2.125" H: .5625" L: 4.
6 - Appendix Internet References Internet References The internet contains vast resources for the computer musician. A few useful sites are listed here, but there are plenty more. Check it out. Software Updates, Tips & Tutorials................ http://www.emu.com Setting up a PC for Digital Audio .................. http://www.musicxp.net MIDI Basics....................................................... Search for “MIDI Basics” (many sites) MIDI & Audio Recording ................................
6 - Appendix Internet References Declaration of Conformity Trade Name: E-MU Systems Model No.: EM8850 EM8870 EM8871 Responsible Party: E-MU Systems Address: 1500 Green Hills Road, Scotts Valley, CA 95066 U.S.A. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
6 - Appendix Internet References Compliance Information United States Compliance Information FCC Part 15 Subpart B Class B using: CISPR 22 (1997) Class B ANSI C63.4 (1992) method FCC Site No.90479 Canada Compliance Information ICES-0003 Class B using: CISPR 22 (1997) Class B ANSI C63.4 (1992) method Industry of Canada File No.
Index Numerics Index Bypass effect insert 51 insert 38 send/return insert 43 C Numerics 1010 PCI Card 13 1-Band Para EQ 55 1-Band Shelf EQ 55 3-Band EQ 56 48 Volt DC Adapter 11 48 Volt Phantom Power 15, 86 4-Band EQ 57 5.1 Surround Connections 20 5.1/7.
Index E E Echo, creating 66 E-Delay Compensator 78 Edge, distortion 61 EDI Cable 11 EDI Connector 19 Effects 1-band para EQ 55 1-band shelf EQ 55 3-band EQ 56 4-band EQ 57 auto wah 58 chorus 59 compressor 59 create new folder 49 creating robot voice 66 descriptions 55 display screen 43 distortion 61 edit 48 flanger 62 frequency shifter 63 leveling amp 64 lite reverb 65 mono delays 66 overview 47 palette 47 phase shifter 67 placing into an insert location 31 preset create new 52 delete 53 overwrite 53 renam
Index J J Jitter Spec 1616 system 92 1616M system 89 L Label, scribble strip 41 Latency, monitoring without 33 LED green 15 red 15 Level Fader 41 Leveling Amp 64 Levels, setting input 35 LFO flanger 62 phase shifter 67 vocal morpher 71 Limiter 60 Line Level I/O, MicroDock 18 Lite Reverb 65 Low Frequency Damping 70 Low Frequency Decay Factor, lite reverb 65 aux send 39 fader 41 insert 31 label 41 mute button 41 new 29 solo button 41 type 29 viewing 21 Mixer Strip add new 29 delete 30 type 29 Monitor balan
Index P P Palette, effects 47 Pan 41 Pan Controls 28 Parametric EQ, setting up 56 PatchMix DSP, disabling 23 Peak Meters 34 Phantom Power 15 description 86 Phase Invert 36 Phase Shifter 67 Phoneme 71 Physical Input Display 44 Physical Output Display 44 Physical Source 29 Pink Noise Generator 37 Playing CDs 29 Post Gain, leveling amp 64 Power Switch, microdock 11 PowerFX 72 resource availability 74 Preamp microphone 15 turntable 18 Pre-Delay, compressor 60 Pre-Fader Aux Sends 42 Preset create new 52 delete
Index T T Templates, session 25 Test Tone Insert 37 Threshold, compressor 60 Toggle Tooltips 73 Toolbar, overview 23 Trim Pot Insert 36 Troubleshooting, using test tone & meter inserts 37 TRS Plugs & Jacks 84 Turntable Inputs 18 Tutorial Automating PowerFX 74 Making the Best Possible Recording 35 Setting up & using E-Wire 78 Setting up & using PowerFX 73 TV Screen 42, 43 U Unbalanced Cables 84 User Preset, effect 52 V Vocal Morpher 71 Volume Control 28 W Wah-Wah 58 WDM Recording & Playback Behavior 83 W