Specifications

PX-7 Owners Manual 91
Sequencer
Pattern Edit Menu

To Combine Multiple Tracks into a Single Multitrack:
1. Select the pattern you wish to edit and press the Pattern Edit button.
2. Scroll to the Combine Selected Tracks To Clipboard screen shown
below using the data entry control.
3. Move the cursor to the lower line of the display using either the left or
right cursor key and press Enter. The following screen appears.
4. Select the tracks you wish to combine using the flashing Track Enable/
Mute buttons.
5. Press Enter. The selected tracks will be copied to the clipboard.
__
__
If you don’t set the
destination track to Multi A or B,
the track will be rechannelized
into a single MIDI channel.
6. Set the destination track to Multi A or B. (Channel Assign screen.)
7. Use the Paste Clipboard To Track function to paste the multichannel
track into the existing pattern or into another pattern.
8. If you’re pasting to another sequence use the Apply Clipboard Settings
function (page 89) to copy the clipboard’s volume, pan, preset, arpeg-
giator status, and send bus assignments to the selected track.
 To Explode the Clipboard Data into Multiple Tracks:
1. Select the pattern you wish to edit and press the Pattern Edit button.
2. Scroll to the Explode Clipboard To Tracks screen shown below using
the data entry control.
3. Move the cursor to the lower line of the display using either the left or
right cursor key and press Enter. The following screen appears.
4. Press Enter. The clipboard data will be divided up and merged with
exiting pattern tracks.
COMBINE SELECTED TRACKS
TO CLIPBOARD: do it
SELECT TRACKS
Press Enter When Done . . .
EXPLODE CLIPBOARD TO
TRACKS: do it
- - PERFORM OPERATION? - -
Enter=Yes Other=Cancel