Specifications

98 E-MU Systems
Sequencer
Pattern Edit Menu
6. Press the right Cursor button to move the cursor underneath the Event
Scroll Field (<->).
7. Turn the data entry control to scroll through the event list and locate
the event you want to edit.
8. Move the cursor to the data field you want to edit and make changes
using the data entry control.
9. Press the Pattern Edit button to exit the Pattern Edit module.
OO
OO
By Popular Request ->  To Insert an Internal or External MIDI Program Change
1. Select the pattern you wish to edit.
2. Press the Pattern Edit button.
Insert the Program Change Event
3. Scroll to the Event List Editor screen shown below using the data entry
control.
4. Press the Enter button as prompted by the display to begin editing.
5. Select an Empty Track using the Track/Channel select button near the
LCD. (Use an empty track for now to keep things simple.) The display reads:
6. Press the right Cursor button to move the cursor underneath the Time
Field.
__
__
Important: If you
choose location 001.01.001 the
program change will only occur
when the pattern is first selected.
See page 129 for details.
7. Turn the data entry control and set the time to the location where you
want the program change to occur.
8. Move the cursor to the lower line of the display and select the “prog”
event type as shown below.
T
01 EVENT <-> 002.03.008
C01 controller #1 v:52
T
06 EVENT <-> 001.01.001
- no events in track -