Specifications

104 E-MU Systems
Sequencer
Song Mode
4. The cursor is on the lower line of the display. Turn the data entry
control to select a Pattern for step one.


Hot Tip: You can
audition patterns In Song Step
Record by pressing the Play
button. Press Play again to stop
auditioning.
5. Press Enter to choose the pattern and increment the step counter. Note
that the current position (Bar) field now indicates the bar position just
beyond the length of the first pattern.
6. Select another pattern for song step 2. Press the Play button to
audition the pattern before pressing Enter.
7. Press Enter when you’ve made your selection and the step counter
increments again.
8. Continue to add Patterns. When you’re ready for the Song to end,
turn the data entry control counter-clockwise and select the STOP
command. If you don’t insert a “Stop” command, the last pattern will
simply continue to play indefinitely.
 To Edit a Song
Changing the Length of Patterns
1. While in Step Record mode, you can move the cursor to the Length
(Ln) field and change the length of the pattern at that step. Length-
ening a pattern will cause it to loop. Shortening a pattern will truncate
the playback to the selected length.
Deleting a Pattern


You can move the cursor
to any field and change it while
in step record mode.
2. Pressing the Erase button (located below the controller knobs) erases
the currently selected step from the song.
Inserting a Pattern
You can insert a pattern at any bar of the song by pressing the Repeat
button. Patterns can be inserted into a Song in two different ways.
• Insert - If you insert a pattern play event in the middle of a step, the pat-
tern will be split at that bar location. The song stays the same length.
• Repeat - If you insert a pattern play event at a step location, the current
step will be duplicated and all events (including both step events and
linear track events) will be slid forward to accommodate the insertion of
the new step (with length equal to the duplicated step). Note that Delete
still functions as is, only deleting the step event, not any data or time.
S
01 STEP Ln: 04 Bar:001
000
0
Ambideep


You must press the
Enter button to confirm each
step change. Any changes
you make without pressing
Enter will be discarded.
S
02 STEP Ln: 99 Bar:009
001
0
Amsterdam