Specifications

PX-7 Owners Manual 105
Sequencer
Song Mode
Inserting a Pattern in the Middle of a Step (split)
3. Move the cursor beneath the Bar field and select the insert point
between two step numbers.
4. Press the Repeat button. The step will be divided at the insert point.
Please refer to the diagram below.
5. If you want to change the pattern of a step, simply change it, then
press Enter.
Inserting a Pattern at a Step (repeat)
6. Use the Track/Channel keys to select a Step number.
7. Press the Repeat button (located below the controller knobs), then
press Enter. The current step will be duplicated and all events
(including both step events and linear track events) will be slid forward
to accommodate the insertion of the new step (with length equal to the
duplicated step). Note that the Delete button only deletes the step
event, not any data or time.
8. Change the pattern to the desired pattern.
You can change the pattern after Insert.
ABCD
ABBCD
Song Track
Pattern Track
If you press Repeat between pattern change events,
a Pattern Play Event is inserted, splitting the previous
pattern. The linear track information remains intact.
Insert
After
Insert
Bar 7
Bar 5Bar 1 Bar 9 Bar 13
Bar 17
STOP
S01
S02
S03
S04
S05
4 bars 4 bars
2 bars 2 bars
4 bars 4 bars