Specifications

PX-7 Owners Manual 109
Sequencer
Song Mode
Realtime Panning
11. Select Pan Knob mode by pressing the Controller Function Select
button.
12. Select Mix View mode by pressing the Mix button (if it’s not already
selected).
13. Turn the data entry control clockwise to select Ch Pan view.
14. Press the Stop button twice to make sure the song starts at the
beginning.
15. Press the Record button in Song mode to get ready to record. The Play
button LED will be flashing.
16. Press the Play button to begin recording. The controller knobs now
adjust the pan positions of all 16 tracks.
17. Press Stop when you’re finished recording.
Recording Quick Edits
The Quick Edit knobs always record on the Basic Channel (the channel
currently displayed in the Preset View screen).
18. Select Quick Edit mode by pressing the Controller Function Select
button.
19. Select the channel with the preset you wish to Quick Edit.
20. Practice your knob movements before recording by playing back the
song and twisting the knobs.
21. When you’re ready to record, press Record, then Play, then perform
the knob movements.
 Erasing Controller Data
1. The Erase Events function (page 114) can be used to erase controller
data.
2. Find the realtime controller # of the knob you wish to erase in the
Controllers menu.
(Volume is always cc#7, and Pan is always cc#10. The numbers of the 16
controller knobs can vary.)
3. Press the Song Edit button.
4. Scroll to Erase Events and move the cursor to the lower line of the
display.
5. Select the realtime controller number from step 2.
6. Press Enter to erase the controller data.