Specifications

14 E-MU Systems
Setup
Basic Setup
Connection
Instructions
Power Switch & AC Receptacle
The AC power switch located on the rear panel is a “hard” power switch.
The front panel On/Off switch is a “soft” power switch that can be used to
turn power on and off when the PX-7 is rack mounted. There is no 110/220
Volt power selector switch since PX-7 utilizes an auto-switching power
supply which accepts from 100V-250V, 50-60Hz.


The Right Main output
jack carries a mono mix of the
left and right channels when the
Left Main plug is not plugged in.
The Left Main output jack is a
stereo jack carrying both
channels when the right output
jack is empty.
Outputs
In order to reproduce PX-7’s wide dynamic range and frequency response,
use a high quality amplification and speaker system and a stereo setup is
highly desirable The headphone output is the same as the Main output
signal. The headphone jack is located on the left side of the front panel.
Footswitches 1 & 2
Connect one or more momentary footswitches for additional control. PX-7
auto-senses either normally-open or normally-closed switches when they
are plugged in. Their functions are programmable in the Controllers,
Footswitch menu and the Preset Edit, PatchCord menu.
Main Outs to Mixer In
Speakers
Amp
Mixer
The Headphone
Output is located
on the Front Panel
TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Footswitch Footswitch
I
VOLUME
O
TRANSPOSE DIGITAL PROC ESSINGSAMPLE M ANAGEMENT
SAMPLE
PRESET
MASTER/GLOBAL
MULTIMODE
PRESET MANAGEMENT DYNAMIC PROCESINGPRESET DEFINITION
DRIVE SELECT L OAD SAVE AUDITION TRIGGER MODE
ESCAPE
MIDI
ENTER
DEC/NO
INC/YES
ABC
JKL
TUV
DEF
MNO
WXY
QZ
GHI
PRS
TRIGGERS
123
456
789
0
MIDI In
MIDI Sound Module
Power
Switch
110V/220V
50-60 Hz
(auto-select)
USB for
E-Loader
Basic Setup