Specifications

PX-7 Owners Manual 257
Arpeggiator/Beats Menu
Duration
Duration This parameter sets the length of time for the current step, defined as a note
value, based on the Master Tempo. The selectable note durations are
described below.
Repeat Each step can be played from 1 to 32 times. A repeat setting of “1” indicates
the step will be played one time (not repeated one time or played twice).
 To Edit a User Pattern
1. The first field in the Edit User Pattern field defines the pattern’s step
number. Start with the pattern Step 01.
2. Define the Key Offset, Velocity, Duration and Repeat values.
3. Repeat steps 1 and 2 until you have setup the desired number of steps
in the pattern.
4. Set the Key Offset to “End” on the last step in the pattern.
User Pattern Name The User Pattern Name page lets you enter a name for any User Arpeggiator
Pattern.
 To Name a User Pattern
1. From the Pattern Edit screen shown above, position the cursor under
the PTRN field.
2. Turn the data entry control clockwise. The following screen appears.
1/32 32nd Note
1/16t 16th Note Triplet
1/32d Dotted 32nd Note
1/16 16th Note
1/8t 8th Note Triplet
1/16d Dotted 16th Note
1/8 8th Note
1/4t Quarter Note Triplet
1/8d Dotted Eighth Note
1/4 Quarter Note
1/2t Half Note Triplet
1/4d Dotted Quarter Note
1/2 Half Note
1/1d Dotted Whole Note
1/1t Whole Note Triplet
1/2d Dotted Half Note
1/1 Whole Note
2/1t Double Whole Note
Triplet
2/1 Double Whole Note
PTRN KEY VEL DUR RPT
S01 +0 ply 1/8 2