Specifications

PX-7 Owners Manual 17
Setup
Power Down Sequence
board. In a pinch, the effect returns can be used to sum additional instru-
ments into the main outputs. It’s like having an extra line mixer when you
need more inputs!
You can use the Sub 1 and Sub 2 jacks as effect returns to the Main Outputs.
Note that the Effects Processors are only routed to the Main Outputs.
Power Down
Sequence
To avoid accidentally turning off the power while playing PX-7, the front
panel power switch incorporates a five second “fail-safe” feature when
powering down. Once the power down sequence has begun, you have five
seconds to press the power switch again and stop PX-7 from turning off.
Rack Mounting PX-7 PX-7 can be rack mounted if you so desire. You’ll need (6) rack spaces to fit
PX-7 into your rack. The black end caps remove easily with three screws to
reduce the width to 19 inches. Rack mounting ears are available from your
E-MU dealer (Model 7770).
MAINS
RL
R Bus
L Bus
Output Section
Tip
Ring
Tip
Ring
SUB 1
RL
Tip
Ring
Tip
Ring
SUB 2
RL
Effects
Processors
POWERING DOWN : 4
Press On / Off to Abort . . .
****