Specifications

28 E-MU Systems
Instant Gratification
Multi-Channel Arpeggiator


If you want to record the
Trigger Buttons on a single MIDI
channel, set the track Channel
Assignment to the same channel
as the trigger buttons.
3. Set the channel setting to MultiA and Dest: internal, as shown in the
screen below. (The trigger buttons are set to play on multiple MIDI channels.
if this track were not set to Multi, all channels would be rechannelized to the
selected channel and the triggers would play back incorrectly.)
4. Make sure that the Trigger Buttons destinations are set to “seq” as
shown below. (This sends the trigger keys to the sequencer input.)
5. Save the Multisetup.
6. Start with a new blank pattern and set the pattern length. Choose 20
bars or so to start.
7. Restore the Multisetup. (Just to make sure everything is set up correctly.)
8. Press Record, then Play. Start recording the trigger buttons.
T
01 CHANNEL ASSIGN
Channel: MultiA Dest: int
T1 TRIGGERS C3 Vel: 127
Latch:on Ch: 01A seq
Set to
seq