Specifications

32 E-MU Systems
Basic Operations
Sequencer Controls
Sequencer
Controls
These buttons control the sequencer transport functions.
Stop Button Pressing the Stop button immediately stops any currently playing Pattern
Sequence or Song Sequence. The sequence remains at its current location.
Press the Play button to resume from the current location.
Press the Stop button when the sequence is stopped to return to the
beginning of the sequence (RTZ). Pressing the Stop button a third time
reloads the initial setup information for the Pattern or Song.
Play Button The Play button engages the transport, regardless of sequencer mode
(except in step edit). The LED in the button will be illuminated when the
sequence is running.
Pressing Play while in Record mode puts the sequencer into Pause mode.
The sequencer stops and the Play LED flashes. Pressing Play again resumes
Record mode.
Record Button The Record button selects one of the three Pattern record modes or two
Song record modes.
Song Record modes (from Song mode)
• One press.............. Realtime record mode
• Two presses........... Step record mode
Pattern Record modes (from Pattern mode)
• One press.............. Realtime record mode
• Two presses........... Grid record mode
• Three presses ........ Step record mode
OO
OO
While a pattern is
playing, press and hold the Play
button and press Record to
jump into Grid Edit mode.
The LEDs to the right of the button indicate the record mode. After
selecting a record mode, the Play button LED will be flashing. Press Play to
begin recording.
You can press Record at any time during recording or playback to go in and
out of Realtime Record mode (i.e. Punch In & Out)
Tap Tempo The Tap Tempo button allows you to change the tempo at any time by
tapping the button at the desired tempo. Three taps are initially required to
change the tempo and then the tempo follows with each subsequent tap.
The Tap-Tempo key
functions as a Shift
Key to access other
features. See pages 62,
125, and 140.