Specifications

60 E-MU Systems
Sequencer
Pattern Mode
12. Press the Stop button twice to make sure the pattern starts at the
beginning.
13. Press the Record button in Pattern mode to get ready to realtime
record. The Play button LED will be flashing.


Use the “Erase cc#
Events” function (page 81) to
erase controller data from the
pattern.
14. Press the Play button to begin recording. The controller knobs now
adjust the volumes of all 16 channels.
15. Press Stop when you’re finished recording.
Real-time Panning
16. Select Pan Knob mode by pressing the Controller Function Select
button.
17. Select Mix View mode by pressing the Mix button (if it’s not already
selected).
18. Turn the data entry control clockwise to select Ch Pan view.
19. Press the Stop button twice to make sure the pattern starts at the
beginning.
20. Press the Record button in Pattern mode to get ready to record. The
Play button LED will be flashing.
21. Press the Play button to begin recording. The controller knobs now
adjust the pan positions of all 16 tracks.
22. Press Stop when you’re finished recording.
 Erasing Controller Data
1. The Erase Events function (page 81) can be used to erase controller
data from a pattern.
2. Find the realtime controller number of the knob you wish to erase in
the Controllers menu.
(Volume is always cc#7, and Pan is always cc#10. The numbers of the 16
controller knobs can vary.)
3. Press the Pattern Edit button.
4. Scroll to Erase Events and move the cursor to the lower line of the
display.
5. Select the realtime controller number from step 2.
6. Press Enter to erase the controller data.
 Using Realtime Repeat
When this button is latched on (LED illuminated) while recording or
playing back a pattern (or song), played notes will repeat at the current
pattern quantize setting (page 53). Simultaneously changing the volume or
pitch as the sound repeats can generate some great effects.
1. Press the Record button once to go into Realtime Record mode.
2. Set the Input Quantize resolution on the LCD to the desired rate.
3. Press the Repeat button illuminating the LED.