Specifications

70 E-MU Systems

Sequencer

Pattern Edit Menu

Pattern Edit

The Pattern Edit menu contains housekeeping, pattern editing ﬁlters and

other tools.

The Pattern Edit button is DISABLED unless you are in Pattern Mode!

Track Enable/Mute

Buttons

IMPORTANT: In Pattern Edit mode, Track Enable/Mute buttons are used

to select which tracks will be affected by the editing operation.

Any enabled tracks will be edited and any disabled tracks will be unaffected

by the editing operation—Quantize, Thin Events, Erase Events, Velocity

Scale/Shift, Extend or Transpose.

Name Pattern Patterns can be named with up to 16 characters. Position the cursor under

the character location and use the data entry control to change the

character.

Pattern Length Patterns can be anywhere from one to thirty two measures in length. A

pattern loops when it reaches the end whether in record or playback

modes.

A pattern’s length can also be changed at any time, before or after

recording. If you increase the length of a pattern after recording, it will play

silently for the extra time unless new data is recorded there. If you shorten

a pattern’s length after recording, it will play up to it’s new length then

loop. Changing the length of a pattern does not change any data until you

save it. If you save a shortened pattern, the unplayed data will be erased.

 To Set the Pattern Length from the Pattern Edit menu

1. Select Pattern Edit mode from Pattern mode.

2. Locate the Pattern Length screen using the data entry control.

3. Move the cursor to the lower line of the display using either cursor key,

then set the length of the pattern using the data entry control.

PATTERN NAME

006

Metallic 6

PATTERN LENGTH

Length: 32 bars