Specifications

86 E-MU Systems

Sequencer

Pattern Edit Menu

Cut Track to

Clipboard

An individual track or a section of a track can be cut or copied and held on

a digital “clipboard” so that it can be pasted into another track or pattern.

This function cuts or removes a track (or section of a track) from the pattern

and places it on the clipboard, where it will be held until it is replaced with

another cut or copy operation, or the power to PX-7 is turned off.

Cutting a section from a track will leave a blank space in the track.

Cut track can be used as

a way to erase a track.



To Cut a Track

Tracks can be freely cut,

copied or pasted between songs

and patterns.

1. Select the pattern you wish to edit.

2. Press the Pattern Edit button.

3. Scroll to the Cut Track to Clipboard screen shown below using the

data entry control.

4. Select the track to be cut. The Home/Enter LED will be ﬂashing once

the cursor is moved to the lower line of the display.

5. Select the Start Bar and the Length (in bars) to be cut.

6. Press Enter to cut the track. Press any other menu button to Cancel the

operation.

The cut section is placed on the clipboard leaving a blank space in the

track where the data was cut out.

CUT TRACK TO CLIPBOARD

Track: 1 Bar:04 Len:07