Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R1301 1Product Overview
1
Product Overview
The SP 1200 is a full size (maximum of 12 meters long), high-performance
platform for medium-to-giant size paper machines with up to 10.2 meters (402
inches) of trim. The platform can carry up to seven sensors at a
± 25° pass angle
(optionally at a
± 45° pass angle). It has on-board electronics for local sensor and
platform signal processing. This chapter discusses the Scanning Platform hardware.
Figure 1-1 shows a typical SP 1200 based measurement system.
This chapter contains the following major sections:
Section ...............................................................................................Page
SP 1200 Options ............................................................................................ 3
ABB Smart Processing Center (ASPC) Backplane Identification ................. 4
Mechanical Structure ..................................................................................... 7
Drive System .................................................................................................. 9
Electrical and Cable Systems ......................................................................... 10
Service Workstation ....................................................................................... 12
Service Tools .................................................................................................. 13