Network monitor user guide ELM-1700N Series ELM-1900N Series Network monitor user gu ide ● Please observe all safety precautions when using this product. ● Please read this manual carefully before using this product.
Items to note Items to note Correct posture for using the위한 LCD올바른 monitor LCD 모니터의 효과적 사용을 작업자세 ●This product is not a computer,but an independent device that simulated Windows.Unlike computers,this product does not support other peripheral devices or connection with communication equipment,and it does not support high quality videos or 3D games. Eye height With the monitor in the center,maintain 110。, degrees vertically and 70。 Horizontally.
Content Checking content Checking content· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·6 Safety precautions Safety precautions· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·7-9 Content Using the application program Using NCT-2000-XP application program
Checking contents Safety precautions This section provides guidelines for user's safety and preventing damage to the product.Be sure to read this carefully. Checking content If these safety precautions are ignored,it can lead to serious injury or even fatality and may also lead to property damage. Check to make sure the product package contain all parts and contact dealer if anything is missing. Contact the dealer if you ’d like to purchase optional parts.
Safety precautions Safety precautions Place the monitor on a flat surface,in a safe area,and place the monitor gently on the surface. If the product short circuits,it may cause product damage or injury. Do not place the product face down. TFT-LCD surface may be damaged. Do not insert picks,tools,or other metal pieces into the ventilation outlet or A/V unit. There may be a risk of electric shock or fire. Do not allow children to hold onto or climb on top of the monitor.
Product introduction and connecting the peripheral devices Product introduction and connecting the peripheral devices Product introduction "NEOTUS"is a combination of LCD monitor and "WoIP:Windows over IP" technology that allows up to 10 NEOTUS to be connected to a single computer to enable up to 10 people to share the single computer.In addition,the user may use NEOTUS as a normal monitor by connecting the monitor directly to a PC.
Product introduction and connecting the peripheral devices Names and descriptions (when Digital RGB input device is not available) Product introduction and connecting the peripheral devices Names and descriptions (when Digital RGB input device is not available) Front 3.5ΦStereo Jack ELM-1700N Series SOURCE MENU ELM-1900N Series Speaker PS/2 Jack Keyboard PS/2 Jack Mouse RJ45 Jack LAN SELECT - Turns power on/off. Power SOURCE - press the button to change the input signal.
Product introduction and connecting the peripheral devices Names and descriptions (when Digital RGB input device is available) Product introduction and connecting the peripheral devices Names and descriptions (when Digital RGB input device is available) Front 3.5ΦStereo Jack ELM-1700N Series SOURCE MENU ELM-1900N Series Speaker PS/2 Jack PS/2 Jack Keyboard Mouse Keyboard Mouse RJ45 Jack LAN SELECT - Turns power on/off. Power SOURCE - press the button to change the input signal.
Installing monitor driver Installing monitor driver If the driver program is damaged,download it from the following website. ·Internet : http://www.erae.com/→Customer Service →User guide and documents ·Internet : http://www.neotus.co.kr Automatic Installation When installation does not work (Window 95/98/ME) 1. Insert the CD packaged with NEOTUS in the CD-ROM. 2. Double click on Monitor Driver/Install.exe file in the CD and follow the below steps. 1. Insert the CD packaged with NEOTUS in the CD-ROM. 2.
Installing monitor driver Installing monitor driver When installation does not work (Windows 2000) When installation does not work (Windows XP) 1. Insert the CD packaged with NEOTUS in the CD-ROM. 1. Insert the CD packaged with NEOTUS in the CD-ROM. 2. Double click on Monitor Driver/Install.exe file in the CD and follow the below steps. 2. Double click on Monitor Driver/Install.exe file in the CD and follow the below steps.
Installing and uninstalling application program Installing the application program Installing and uninstalling application program 4. Select the folder to install the program to and click .To install to a different folder, click and select the desired folder. 5. When the screen shown to the right appears,enter the administrator password,select "Network management console" and click .
Installing and uninstalling application program ● References Installing and uninstalling application program 10. Serial number:Enter one serial number for each NEOTUS. If multiple NEOTUS monitors have been installed,refer to the information below.(Click and enter serial numbers for all NEOTUS units.) 1. In the next screen,select create new account to add a new users (ex:user3) ※ Refer to the OS user manual for information on user accounts.. Click the button. 11. 2.
Installing and uninstalling application program 3. Select "Remove all componenst and registration information" and click . Network configurations Using IP sharing device (supports switching of 100M or more,support DHCP function) When IP sharing device is used,fixed IP as well as dynamic IP can be used.Except,dynamic IP can only be used if the IP sharing device has DHCP server function and the DHCP function has been enabled.
Network configurations 5. When the following screen appears,select "Obtain an IP address automatically" and "Obtain DNS server address automatically" and click . Network configurations ●References An IP address has been automatically allocated to the PC,and you need to know this IP addres. 6. 7. 1. Click from Windows and select "RUN". 2. In the "Open" field,enter "cmd" and click .
Network configurations Network configurations 10. You can see that PC and NEOTUS are now connected.You can start using the NEOTUS. 11. 5. Configure the settings as shown in the screen shot to the right and click . (Select "Next IP address" and enter the IP address,subnet mask and default gateway.Then select "Use the following DNS server address" and enter the default DNS server address.) 6.
Network configurations Network configurations Directly connecting PC and NEOTUS 6. To configure NEOTUS' settings,turn on the NEOTUS monitor and press the input signal button to conver to the network and click the "Setup" menu from the start page. 7. Select the 'Network' tab.Then,select the 'Use Static IP address'item to enter as follows.(For example,enter IP Address : 192.168.0.2, Gateway : 000.000.000.000. IP address and gateway are different depending on the host PC's environment.) 8.
Using the application program Using the application program Using the application NCT-2000-XP When NCT-2000-XP application program is installed as explained in the previous chapter,the following application program groups are automatically created. From Windows,click then select to check that NCT-2000-XP application program has been installed.
Using the application program Using the application program View each station information description of configuration function ● Using the application program Product version,manufactured date,manufacturer,copyright and website for technical support are shown. ● Product Information Shows the information of the connected NEOTUS. ● Information ● License Information This shows user information. 1.Station name : This can be changed by the user.The default name is Station #1. 2.
Registering and upgrading NCT-2000-XP online Registering and upgrading NCT-2000-XP online ● System configuration 5. System start time:Displays the length of time the system was used after the host PC started. 6. Main station automatic logon:If there is no password in the main station,you can choose whether to login automatically. 7. Exit Timeout (Seconds):You can set the exit time. 8. Disable notice transmissions:Yes/No 9. Administrator password:Password can be set to restrict access to console menus.
Registering and upgrading NCT-2000-XP online References ● When "Offline - Create registration file" is selected 1. This is the user registration screen.To change the information,click and make the necessary changes and to continue,click . 3. When all information has been entered correctly,serial number registration starts.Do not turn off the computer or disconnect from the Internet unit the registration is complete.
Registering and upgrading NCT-2000-XP online Registering and upgrading NCT-2000-XP online ● When "Offline Cancel file/e-mail registration"is selected Registering and upgrading the NCT-2000-XP on the Internet Registering and upgrading the N C T -2 0 0 0 -X P on the Internet. 1. ● Upgrade using file Program download from the website and upgrade using CD or floppy disk Note) 1. In this case,user registration must have been completed from the previous version. 2.
Selecting and adjusting OSD screen Selecting and adjusting OSD screen Monitor screen adjustment Screen adjustment [OSD] start screen Selecting and adjusting OSD screen >Brightness Adjusts brightness. ◀ : Dims the screen. ▶ : Brightens the screen. >Contrast Adjusts contrast. ◀ : Darkens the contrast. ▶ : Lightens the contrast. >Phase Fine adjustment of phase. This cannot be adjusted in the digital mode. ◀ : The fine adjustment value decreases. ▶ : The fine adjustment value increases.
Selecting and adjusting OSD screen Color adjustment Selecting and adjusting OSD screen OSD Color adjustment detailed categories OSD >Menu time adjustment Adjusts time display on the menu. > Color intensity adjustment - Color intensity adjustment can be used to select the desired color. The default value is 7500K. ◀,▶ : Use this button to adjust the position of the OSD menu. >Adjusts menu position.
Other Selecting and adjusting OSD screen Options Recommendations To enjoy the optimal picture quality Options >1. TFT-LCD monitors have one specific resolution at which it provides the best picture quality.Therefore,the display quality may be lower if not set to the optimal resolution. Be sure to use the optimal resolution whenever possible. >Factory reset Select Factory reset and click "▶" key to reset the monitor's settings. The optimal resolution for each TFT LCD type is as follows.
Other Other Self check function Warning If the monitor remain black even when it is properly connected to the computer,and the power light is blinking,use the following method to conduct self diagnosis. Please clean the exterior with dry cloth. ●Do not scratch the panel with fingernails or a sharp object. ●Do not sue benzene,pain thinner or other abrasive substance or a wet cloth. >1. Turn off the computer and the monitor.
Other Other Product standards Product standards(model with DVI input outlet) (model without DVI input outlet) >Display portion(ELM-1700N/ELM-1900N Series(Without DVI unit)) Model ELM-1700N Series ELM-1900N Series Screen 337.92(H) × 270.336(V) 17.0 inch 376.32(H) × 301.056(V) 19.0inch Pixel pitch 0.264(H) × 0.264(W) 0.294(H)× 0.294(W) Maximum visual periphery 75。 / 60。 / 75。 / 75。 ( 85。 / 85。 / 85。 / 85。 Display colors 16.2M 16.
Other Other Table of supported modes Resolution 640 × 480 720 × 400 800 × 600 1024 × 768 1280 × 1024 horizontal frequency (Khz) vertical frequency (Hz) 31.47 37.86 37.50 31.47 35.16 37.88 48.08 46.88 48.36 56.48 60.02 63.98 79.98 60 72 75 70 56 60 72 75 60 70 75 60 75 Power save function This reduces power use. When the monitor is in power save (sleep)mode,this can be seen by the colored power light that stays on,and the screen will come back on when you click the mouse or any key.