User's Manual
Selecting and adjusting OSD screen
43
Selecting and adjusting OSD screen
Monitor screen adjustment
42
Screen adjustment
Selecting and adjusting OSD screen
O S D
(On Screen Display)
selection and screen adjustment
[OSD] start screen
1. Click "Menu" to open OSD screen.
2. Click ◀/ ▶to select desired main menu.
3. Click "Select" after selecting the main menu.
4. The cursor moves to the lower menu. Use ◀/ ▶button to go to the desired menu.
5. Click "Select" after selecting the lower menu.
6. Use ◀/ ▶to adjust the settings.
7. Click the "Menu" button 3 times to close the OSD screen and save the adjustments.
※If "Menu" button is clicked during configuration,the screen will go to the previous screen.
※The number may change according to the saved value.
Adjusts brightness.
>
B r i g h t n e s s
◀: Dims the screen.
▶: Brightens the screen.
>
C o n t r a s t
Adjusts contrast.
◀: Darkens the contrast.
▶: Lightens the contrast.
>
P h a s e
Fine adjustment of phase.
This cannot be adjusted in the digital mode.
This cannot be adjusted in the digital mode.
This cannot be adjusted in the digital mode.
This cannot be adjusted in the digital mode.
◀: The fine adjustment value decreases.
▶: The fine adjustment value increa
s
es.
Adjusts frequency sampling.
Frequency
◀: Reduces sampling frequency value.
▶: Increases sampling frequency value.
H
p
o
s
i
t
i
on
Adjusts H position.
◀: Screen moves toward the right.
▶: Screen moves toward the right.
V
p
o
s
i
t
i
o
n
◀: Screen moves toward the bottom.
▶: Screen moves toward the top.
Adjusts V position.