42˝ PDP Monitor User's Guide Please observe all safety precautions when using this product. Please read this manual carefully before using this product.
CONTENTS Quick and Easy Installation Versatility and Expandability That doesn’t make you feel fatigue on your Eyes. Flat-Panel Digital Display easy on the Eyes.
CONTENTS Basic Use Changing Sound Settings 30 Custom Sound Adjustment 31 Selecting the Menu Language 32 Setting OSD Tone Menu Background 33 Application Changing Screen Size To view the still picture Viewing Picture in Picture 33 33 34~35 Auto Volume Control 36 Stereo Setting 36 Resetting PDP Monitor Setting 37 Setting Time 38 Automatic Power On/ Off 39 Monitor Using TV as a Moniter 40 Adjusting PC Screen 40 Adjusting Colour Tone 41 External adjustment Extermal adjustment 42 Set
Safety Precautions Power Supply Warnings Do not touch the power plug with wet hands. Doing so may result in electric shock. Do not bend the power cord excessively or place heavy objects on it. Doing so may result in fire or electric shock. Do not use a damaged power cord or plug or a loose outlet. Do not plug several devices into the same outlet. Doing so may result in fire or electric shock. Doing so may cause the outlet to overheat and start a fire. Insert the power plug fully into the outlet.
Safety Precautions Installation Warnings Do not place containers with liquids such as flower vases, soft drink cans, or medicine bottles or small metallic objects on top of the unit. If liquid enters the unit or any metal object falls into the unit, it may result in short-circuit, fire, or electric shock. Do not place a burning candle, burning anti-mosquito incense, or lighted cigarette on top of the unit. Do not place the unit near any heat source such as a fireplace or space heater.
Safety Precautions Use and Maintenance Warnings Disconnect the power cord from the wall outlet during an electrical storm. Not doing so may result in fire or electric shock. Do not insert any metal objects, such as a screwdriver, paper clip, or bent wire into the ventilation openings or A/V terminals. Do not allow children to climb or hang on the unit. The unit could topple over onto a child and result in serious injury. Doing so poses a serious risk of fire or electric shock.
Safety Precautions Important Safety Instructions Important safeguards for you and your new product Always be careful when using your PDP Monitor. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth.
Safety Precautions Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
Safety Precautions Important Safety Instructions WARNING TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Caution : - These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Safety Precautions Considerations For Usage Still image (immovable) screen may cause permanent damage to PDP Monitor. 1. Lengthy display of still images from video games, banners, graphics and others may fatally damage the screen. 2. When using Picture-In-Picture, permanent damage may occur if the sub-image screen stays on the corner of screen for a long time. 3. When using the PDP Monitor in 4 : 3 formats with sidebars for a long period of time, it may cause damage to the plasma panel.
User Guidance Information Names of each part Front View Input Button Volume Menu Button Standby Button Up / Down Button Button Options To improve the quality of the PDP Monitor, specification is subject to change without notice. Please contact your dealer for current options available.
User Guidance Information Controls and Functions Back View RS-232C Terminal Composite 1 Terminal HDMI/DVI Terminal S-Video Analog PC Terminal Stereo Output Component 1 Terminal OPTICAL (Digital Audio output) Component 2 Terminal AC Input PC Audio Input Terminal Component 1 Audio Terminal Component 2 Audio Terminal Accessories The configuration of the components may look different from the following illustration. User's Guide Power Cord 12 Battery 1.
User Guidance Information Mounting on a Desktop Your PDP Monitor can be mounted on a Desktop as shown in the figure above. This is not floor-standing unit. Installation Precautions Wall Mounting Please secure enough space for safe use. (Please refer to A and B.) Installation of the PDP Monitor in an improperly ventilated location can cause a fire or damage to the PDP Monitor due to increased temperature.
User Guidance Information Remote controller Functions of remote controller buttons The remote controller is using Infra-Red (IR). Point it towards the front of the PDP. The remote controller may not work correctly if it is operated out of range or out of angle.
User Guidance Information Precautions Avoiding Remote Control Problems 1. Check the polarity (+,-) of the batteries in the remote controller. 2. Check that the batteries have power. 3. Check that the PDP Monitor is powered and that it is properly plugged in. 4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the PDP Monitor. Instering Batteries in the Remote Controller 1. Open the cover out completely. 2. Insert the two supplied batteries (AAA, 1.5V).
Connection VCR Connections Connecting to the composite terminal Connection terminals of other appliances differ by manufacture and model. < VIDEO > (R) (L) < PDP Monitor Back view > Composite Cable Connect the PDP Monitor's Composite terminal to the VCR's Composite Out terminal using the Composite cable.
Connection Cable TV Connections Connecting to the component terminal In order to watch Cable TV, Subscribe to your local Cable TV company and install a separate converter(Set-Top-Box) Connection terminals of other appliances differ by manufacture and model. < Cable broadcasting receiver > < PDP Monitor Back view > Y Pb Pr (R) (L) Audio cable Component cable 1.
Connection Viewing Cable TV 1. Turn on the PDP Monitor and press 2. Use on the remote controller. to move to "Component1/2". If S-Video has been connected, select "S-Video". If SCART terminal has been connected, select “SCART1” or “SCART2”. If Composite has been connected, select “Composite”. 3. Turn on the cable broadcasting receive and select the channel you wish to view.
Connection Camcorder/Game Console Connections Connecting to the component terminal Connection terminals of other appliances differ by manufacture and model. < Camcorder/ Game machine > Y Pb Pr (R) (L) < PDP Monitor Back view > Audio cable Component cable 1. Connect PDP Monitor's Y, Pb, Pr terminal in Component 1/2 to the Camcoder/game console’s Component Out terminal with the Component cable. 2.
Connection DVD Connections Connecting to the component terminal Connection terminals of other appliances differ by manufacture and model. < DVD > Y Pb Pr (R) (L) Audio cable < PDP Monitor Back view > Component cable 1. Connect PDP Monitor's Y, Pb, Pr terminal in Component 1/2 to DVD's Video Out terminal using the Component cable. 2. Connect PDP Monitor's Audio terminals (left & right) in Component 1/2 to DVD's Audio Out terminal using the Audio cable.
Connection DVD Connections Connecting to the HDMI terminal < DVD > < PDP Monitor Back view > (R) (L) Y Pb Pr HDMI Cable Connect the HDMI terminal of the PDP Monitor to the DVD with the HDMI cable. Playing the DVD 1. Turn on the PDP Monitor and press 2. Use on the remote controller. to move to "Component 1/2". If S-Video has been connected, select "S-Video". If HDMI terminal has been connected, select “HDMI”. 3. Turn on the DVD, insert the DVD and press Play button.
Connection DTV Connections Connecting to the component terminal < DTV receiver> Connection terminals of other appliances differ by manufacture and model. Y Pb Pr (R) (L) Audio Cable Component Cable < PDP Monitor Back view > 1. Connect PDP Monitor's Y, Pb, Pr terminal in Component 1/2 to Video receiver's Video Out terminal using the Component cable. 2. Connect PDP Monitor's Audio terminals (left & right) in Component 1/2 to DTV receiver's Audio Out terminal using the Audio cable.
Connection PC Connections Connection terminals of other appliances differ by manufacture and model. < PC > < PDP Monitor Back view > Audio Cable HDMI to DVI Cable D-SUB Cable Connect PDP Monitor's RGB terminal to PC's RGB terminal using the D-Sub cable. Connect PDP Monitor's PC Audio terminal to PC's Audio terminal using the Audio cable. (Only possible for PC's with Audio terminal) If there is a DVI- D terminal in your PC, use the HDMI to DVI cable connection. How to Use as PC 1.
Connection Home Theater Connections Connection terminals of other appliances differ by manufacture and model. < Home Theater> VIDEO (L) (R) < PDP Monitor Back view > Optical Cable Connect PDP Monitor's Digital Audio Out terminal to Home Theater’s Optical terminal using the Optical Cable. Stereo Out Connections < Speaker> < AUDIO> VIDEO (L) < PDP Monitor Back view > Connect PDP Monitor’s Stereo Out terminal to Audio’s Audio out terminal using the Audio Out Cable.
Basic Use Powering the PDP Monitor Prior to using the PDP Monitor. Insert the power plug. Connect external equipment properly. Please use only after carefully reading this manual. Check the power connection to the AC outlet and the connection of AC input to the PDP Monitor. Power on/ off To turn the PDP Monitor on : Press the "Standby" button. To turn the PDP Monitor off : Press "Standby" button on the PDP Monitor. If ON Time setting is set, the standby power should be ON.
Basic Use Watching TV Volume Control increases the volume. decreases the volume. To turn off only sound Use the mute function to turn off the PDP Monitor sound for a while, when a phone or a bell rings. Press button again to hear the sound again. INFO - To check the current state Press button on the remote control. Display shows user's setting and selections. Press 26 button or wait 4 seconds for the display to disappear.
Basic Use Selecting TV/External Input You can between the TV signal and the input signal of other appliances connected to the TV. Use this function to switch to the input source you wish to view. Press Use to move to the desired item. Press to select. You can connect, Composite, S-Video, Component1/2, PC and HDMI to the TV set and enjoy these functions. All input sources will be automatically detected and displayed on screen. Using the Menu Press The menu screen will appear.
Basic Use Changing Picture Settings Press . Use to move to Press to move to "Mode". Custom . Standard Mild Use select between Custom/ Dynamic/ Standard/ Move/ Mild. Press to go back to the previous menu. Dynamic Movie Custom : Select to set user's preferences. Dynamic : Select when using the PDP Monitor in a brightly lit environment. Standard : It is the best screen setting. Movie : Select when watching a movie. Mild : Select when using the PDP Monitor in a dimly lit environment.
Basic Use Changing Sound Settings Press . Use to move to Press to move to " Mode". Use select between Custom, Standard, Music, Movie, Speech. Press to go back to the previous menu. . or Press Custom Standard Movie Music Speech Standard : It is the flat sound setting with no equalizer effect at all. Music : It is preset for music listening. Movie : It is preset sound for watching a movie. Speech : It is preset for hearing vocal audio clearly.
Basic Use Custom Sound Adjustment Press . Use to move to Press to move to " Equalizer". Press to select. Use to move to the desired category. Use to adjust the setting. Press to go back to the previous menu. . Custom Mode Volume : It adjusts the sound volume. Balance : It adjusts the volume of speakers on the left and the right. Equalizer : It adjusts the volume by frequency bands and the user can select the desired sound quality.
Basic Use Selecting the Menu Language Menu screen can be viewed in the language preferred by the user. Press . Use to move to Press to move to "Language". Use to select the desired language. Press to go back to the previous menu. . Setting OSD Tone Menu Background Press . Use to move to Press to move to "OSD Tone". Use to select the "On" or "Off". Press to go back to the previous menu. .
Application Changing Screen Size Press . 4:3 wide Zoom Panorama In PC input mode, you can only select either the wide or the 4 : 3 mode. Panorama wide Zoom 4:3 To view the still picture Press . Picture will freeze, but sound will continue to be heard. Press again to cancel. Screen Size wide - It makes 16 : 9 format for input signal. Panorama - It makes 4 : 3 format fit into 16 : 9 format with minimal loss in content. Zoom - It enlarges the natural screen factor by approx.
Application Viewing Picture in Picture Press . Use to move to Press to move to "Mode". Use to select the "PIP". Press to go back to the previous menu. Or press . . Sound from only one of the screens may be heard. External Input Press to move to "Sub Input Source" Use to select the desired input source. Press to go back to the previous menu. Or press . The sub-screen can be changed to display picture from the desired input source. Changing the Screen Size Press to move to "Mode".
Application Viewing Picture in Picture Selecting Position Press to move to "Position". Use to select the desired position. Press to go back to the previous menu. Or press . Sub-screen position can be selected only from the . Selecting Sub Screen Sound Press to move to "Sound Select". Use to select the "Main" or "Sub". Press to go back to the previous menu. Or press The sound of the sub screen can be selected when PIP is being displayed.
Application Auto Volume Control This feature maintains an equal Volume level ; even if you change channels. Press . Use to move to Press to move to "AVC". Use to select the "On" or "Off". Press to go back to the previous menu. . Stereo Settings Press . Use to move to Press to move to "MTS". Use to select the desired category. Press to go back to the previous menu. Or press . .
Application Resetting PDP Monitor Settings It resets all of the parameters to the factory default. Press . Use to move to Press to move to "Reset". Press to select. Use to select the "Yes" or “No”. Press to select. . The PDP Monitor will turn off. The parameters will be set to factory default.
Application Setting Time Press . Use to move to Press to move to "Time". Press to select. Use to move to “time”. . Use digit key to adjust the desired hour and minute. Press to go back to the previous menu. You can set your local time by adjusting the differences from GMT, according to your location.
Application Automatic Power On/Off Clock time must be set Press . Use to move to Press to move to “Time”. Press to select. . Press to go back to the previous menu.
Monitor Using TV as a Monitor Press Using TV as a Monitor . Use to move to "PC". Press to select. PC Mode must be on in order for you to use the TV as a monitor. Adjusting PC Screen Use this function to remove or reduce noise impacts in case TV vibrates and image boundary is unstable Press . Use to move to Use to move to desired category. Use to adjust the setting. Press to go back to the previous menu. . Auto : Use when the screen is not focused or centered.
Monitor Adjusting Colour Tone Press . Use to move to Use to move to "Colour Tone" Press to select. Use to select the desired category. Use to adjust the setting. Press to go back to the previous menu. . Phase : It adjusts the phase shift of the image. Use when image appears blurry or out of focus.
External adjustment External adjustment Use the RS-232C jack o control monitor’s functions externally by external equipment. How connect a external equipment Set ID Use this function to choose monitor ID number. Press . Use to move to . Press to move to "Set ID". Press to select. Use to select the desired ID number. Press to go back to the previous menu. The adjustment range of Set ID is 1~99.
External adjustment Special features Type of connector : D-Sub 9-pin male No. Pin name 1 No connection 2 RXD (Receive data) 3 TXD (Transmit data) 4 DTR (DTE side ready) 5 GND 6 DSR (Dce side ready) 7 RTS (Ready to send) 8 CTS (Clear to send) 9 No Connection Pin NO.4 and Pin NO.6 must be connected on monitor side Use a crossed (reverse) cable. Wire the cable so that each pair of data lines cross between the two devices.
External adjustment RS232C Communication Protocol COMMUICATION PARAMETERS BAUD RATE : 19200 bps Data Length : 8bits Parity : None Stop bit : 1bit Command List Item Data(hex) Item 1. Power ASCII Code p 00h~01h 9. Information ASCII Code 2. Input Source i 00h~07h 10. Pip On o 00h~01h u 00h~07h f Data(hex) 00h~01h 3. Aspect Ratio r 00h~08h 11. Pip Source 4. Volume Mute w 00h~01h 12. Pip Location n 00h~03h e 00h~01h 5. Volume Control v 00h~64h 13. Pip Sound set 6.
External adjustment RS232C Communication Protocol 1.
External adjustment RS232C Communication Protocol 4. Volume Mute : w 7. Brightness : b To Select volume mute on/off * Transmission {w}{ }{SET ID}{ }{Data}{Cr} Data 0 : On Data 1 : Off * Ack {SET ID}{:}{OK}{x}{Data}{x} Data 0 : On Data 1 : Off To adjust Brightness * Transmission {b}{ }{SET ID}{ }{Data}{Cr} Data : Min : 00h~Max : 64h * Ack {SET ID}{:}{OK}{x}{Data}{x} Data : Min : 00h~Max : 64h 8. Contrast : k 5.
External adjustment RS232C Communication Protocol 46 11. Pip Source : u 13.
Maintenance and Service Trouble shooting In case a problem occurs with your PDP Monitor, please take the following steps first. If you still have the problem, turn the power off and contact your dealer or an authorized service center. Screen related Matters Problem Action The screen does not appear. Is the power plug pulled out? Insert the power plug. Turn the main power button on and press the power button of the remote controller. The screen appears too slowly after the power is turned on.
Maintenance and Service Trouble shooting Tips Others Problem Action Remote controller does not work. 1. Check if main power is On. 2. Check that the batteries of the remote controller were loaded properly. 3. Check to see if any obstacle exists between the PDP Monitor and the remote controller and remove it, if any. 4. If the batteries have no power, replace them with two new batteries. 5.Please check out current mode of fnuction key. PDP Monitor makes strange noise.
Maintenance and Service Supported Display Modes Component Mode [ Y, Cb (Pb), Cr (Pr) ] Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 720 480 15.73 60.00 SDTV, DVD 480i 720 576 15.63 50.00 SDTV, DVD 576i 720 480 31.47 59.94 SDTV, 480p 720 576 31.25 50.00 HDTV, 576p 1280 720 37.50 50.00 HDTV, 720p 1280 720 45.00 60.00 HDTV, 720p 1920 1080 28.12 50.00 HDTV, 1080i 1920 1080 33.75 60.
Maintenance and Service 42" Specification Specifications Aspect Ratio Screen Size (H V) Resolution 16 : 9 921.6 519.2mm 1024 768( XGA ) (1 Pixel = 3RGB Cells) Cell pitch (H V) 300 (H) Displayable Colors 16.
A R T 51 51 90-X-42-X3NM-BDMI-00 D I G I T A L
