User's Manual

15
Avoiding Remote Control Problems
Instering Batteries in the Remote Controller
Precautions
How to use remote controller
2. Insert the two supplied batteries (AAA, 1.5V). Ensure
that the polarities (
+ and - ) of the batteries are aligned
correctly.
1. Open the cover out completely.
3. Replay the cover.
1. Check the polarity (
+ , - ) of the batteries in the remote controller.
2. Check that the batteries have power.
3. Check that the PDP Monitor is powered and that it is properly plugged in.
4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the PDP Monitor.
CAUTION : Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the national code (Recycling program).
The remote control should be operated within 23feet(7m) and 30
to the left and the right of the IR receiver
on the front of the PDP Monitor.
Used batteries should be disposed properly.
15
User Guidance Information