User's Manual

Viewing DTV

1. Turn on the PDP Monitor and press on the remote controller.

2. Use to move to "Component 1/2".

If D-Sub 15 Pin terminal has been connected, select “PC”.

If HDMI terminal has been connected, select "HDMl".

3. Turn on the DTV receiver and select the channel that you want.

DTV Connections

Connection

< PDP Monitor Back view >

1. Connect PDP Monitor's Y, Pb,Pr terminal in Component 1/2 to Video receiver's Video Out terminal using the Component

cable.

2. Connect PDP Monitor's Audio terminals (left & right) in Component 1/2 to DTV receiver's Audio Out terminal using

the Audio cable.

DTV receiver's output terminal can be marked Y, Pb,Pr or Y, Cb, Cr according to products.

Some of DTV receiver(Set-Top-Box) have an PC Connector (D-Sub 15pin) instead of Component output .

Some of DTV receiver(Set-Top-Box) have an DVI Connector instead of Component output .

Connect Audio Cable from the Audio output terminal of receiver to the PC Audio input terminal of the PDP Monitor.

Connecting to the component terminal

Connecting to the D-SUB or HDMI terminal

Connection terminals of other appliances differ by manufacture and model.

(R)

(L)

< DTV receiver>

(R)

(L)

rPbY

< DTV receiver>

Audio Cable

Component Cable

HDMI to DVI Cable

D-SUB Cable

Audio Cable